Toshiba 55SL417U Owner's Manual page 112

Usingthe TV remote and HDMI® CECControl to control other devices
To control the basic functions of connected audio/video devices using the TV's remote control, connect an HDMI ®
CEC compatible audio receiver or playback device. The HDMI ® CEC Control feature uses CEC technology as
regulated by the HDMI standard.
Playhackdevice
Audio receiver (HDMI® CEC DVDplayer,etc.)
4
@
Playhackdevice
(HDMI ® CEC DVDplayer,etc.)
To connect an audio receiver and playback devices, you will need:
° HDMI cables (_ p. 14)
Note:
• If several devices are connected, the HDMI _ CEC Control feature may not operate properly.
° For proper operation, it is recommended that you use HDMI cables with the HDMI Logo (H_NI|).
Before controlling the devices:
• For an explanation of setup and operations, see "Using HDMI ® CEC Control" (_ p. 39).
• Configure the connected devices. See each device's operation manual.
Note:
This feature is limited to models incorporating Toshiba's HDM/® CEC Control feature. However, Toshiba is not liable
for those operations. See the individual instruction manuals for compatibility information.
When using an external AV amplifier:
The picture and sound may not be properly synchronized. In this case, adjust the delay time of the sound on the AV
amplifier.
Note: The control range of the delay time differs according to the device you use.
Connecting an HDMIaudiosystem
If your HDMI amplifier supports ARC, audio from the TV can be sent to the amplifier via an existing HDMI cable.
You will need:
° HDMI cable
TVbackpan e'.... _-=E=_<_o _
I ! .....
AVamplifierthat HDMI
supports A RC cable
HDMI'sARC(AudioReturn Channel)feature
This feature enables the audio signal of the TV to
be sent to an AV amplifier via the HDMI cable.
It will not be necessary to connect a cable from
the audio output of the TV to the audio input of
the AV amplifier to reproduce the audio
received from the tuner of the TV through the
AV amplifier.
Note: Only HDMI 1 supports ARC.
19