Travel; Turning The Mower - Hayter Harrier 48 48ST Owner's Handbook Manual

OPERATING THE MOWER
1.19
1.19

TRAVEL

Forward travel: Hold the handlebar and operate the clutch
lever to power the mower in a forward direction.
Travel speed is controlled by engine speed. Use the throttle
control to increase forward travel speed.
CS061
Release the clutch lever to stop the mower from travelling in
a forward direction.
When the clutch lever is disengaged the mower can be oper-
ated as a push model. This feature is useful when mowing
in confined areas.
CS051
Reverse travel: Release the clutch lever. Hold and pull
against the handlebar with both hands to reverse the mower
towards you.
WARNING - PREVENT ACCIDENTS: Always reverse
the mower carefully towards you. Always disengage the
cutterbar drive before walking backwards with the
mower.

TURNING THE MOWER

To make a wide turn: Steer the mower with the handlebar
in the direction required.
To make a tight turn: Stop and apply downward pressure
on the handlebar to raise the front wheels of the mower just
above ground level and steer the mower using the handlebar
in the required direction.
WARNING - PREVENT ACCIDENTS: DO NOT raise
the front of the mower excessively when making a turn.
NEVER raise the rear of the mower when the engine is
running.
485101MT210999A