Setting Up Sources - Meridian 800 User Manual

Reference dvd/cd player

Hide thumbs Also See for 800:

Table of Contents

CONFIGURING

USING A COMPUTER

Setting up sources

This section describes how to use the Meridian Configuration program to

configure the sources provided by the DVD/CD player.

To set up sources

• Click the Sources icon in the left-hand panel of the Meridian window.

The right-hand panel shows a list of the 12 sources that are available. For

each source you can display three pages of settings by clicking the

Options , Audio , or Advanced tabs.

To configure the source options

• Select the source in the list of sources.

• Click the Options tab:

• Select Source exists if you want to use this source.

You can prevent the source from appearing in the list of sources, or being

selectable using the Meridian System Remote, by disabling this option.

• If you want, you can change the name displayed when the source is

selected by editing the Name field.

The name can consist of up to five letters, digits, or the characters space,

full-stop, and minus. The name you specify is shown in the list of sources

followed by the Meridian System Remote key used to select the source in

brackets.

Table of Contents