Setting Up Sources - Meridian 800 User Manual

CONFIGURING
WITHOUT A

Setting up sources

COMPUTER
This section explains how to use Gain mode to set up the sources connected
to the DVD/CD player via an analogue input card.
To turn on Gain mode
• Put the DVD/CD player into standby by pressing Off (front panel or
• Press and hold the Gain- key under the front panel for at least five
The display shows:
The DVD/CD player will then return to standby with Gain mode turned on.
Gain mode adds an extra Sensitivity option to the menus.
To turn off Gain mode
• Repeat the above procedure until
To adjust the sensitivity of a source
To obtain the best signal-to-noise ratio for your analogue sources you can
adjust the sensitivity of each input to give the highest level that does not
produce clipping.
• Turn on Gain mode, as described above.
• Select the source you want to adjust, with loud source material playing.
• Press Function < or > (remote or under the front panel) until the display
For example:
• Press Function A or V (remote or under the front panel) to change the
You can select between sensitivities of 0.5V (most sensitive), 1.0V, 2.0V, or
2.5V (least sensitive).
remote).
seconds.
the display shows:
shows the current sensitivity.
sensitivity.
Gain On
Gain Off
Radio 2.0V In
53