Setting Up Outputs - Meridian 800 User Manual

CONFIGURING
USING A COMPUTER

Setting up outputs

This section describes how to use the Meridian Configuration program to
configure the 800 Reference DVD/CD Player's outputs to suit the other
equipment in your system.
For each audio format you can specify whether the equipment connected
to the Main and Tape digital outputs can decode that format.
The options are arranged in two columns:
• Main specifies the options for the main multi-channel outputs.
• Aux specifies the options for the auxiliary outputs.
DVD-Audio tracks may have between one and six channels active. When
playing a multi-channel recording, there may also be a 2-channel version
available on the 800 DVD/CD Player auxiliary output, depending on how
the disc was authored. If your playback system is 2-channel then the 800
should be configured to force a 2-channel output from the main left and
right outputs.
To specify the outputs
• Click Outputs in the left-hand panel of the Meridian window:
• In the Decoder section select 6-channel capable if your decoder can
accept a multi-channel input. This option is only available for the main
multi-channel outputs.
63