Selecting The Audio Settings - Meridian 800 User Manual

CONFIGURING DISC
OPTIONS

Selecting the audio settings

The Audio setup menu lets you change the audio settings of the 800
DVD/CD Player:
To specify the digital format
• Highlight Digital format in the Audio setup menu, and press Enter.
The following menu is displayed:
• Press V or A to select the output you want to configure, and press
Enter, then press V or A to select Yes or No, and press Enter to
confirm the setting.
Main outputs specifies the setting for the main multi-channel outputs.
Aux output specifies the setting for the auxiliary output.
• Select No if you are connecting the specified output to an external
decoder and you want the external decoder to decode the bitstream; for
example Dolby Digital, DTS, etc.
• Select Yes if you want the 800 DVD/CD Player to convert the audio to 2-
channel PCM on the corresponding outputs for connection to an 861 via
a Meridian multi-channel link, or for direct connection to Meridian DSP
Loudspeakers or a digital preamplifier.
45