Meridian 800 User Manual page 72

CONFIGURING
USING A COMPUTER
To set the advanced source options
• Click the Advanced tab to show the Advanced page of settings:
• If the source is a Meridian product (internal or external), set Comms
type to 1C for a CD player, 2C for an FM tuner, and 3C for a DVD
player. Otherwise set it to none .
• If you have more than one Meridian source of the same type you can
configure them to have different Comms addresses. You can then select
the appropriate source by specifying its Comms address in the Comms
address field. Normally this is set to 1.
• Select Source is internal to this product
• Select Poor digital audio source – frequency out of range
have difficulty locking to a source.
• Select any of Triggers 1, 2, or 3 to activate the specified trigger outputs
when this source is selected.
for the DVD controller.
67
if you