Meridian 800 User Manual page 71

Reference dvd/cd player

Hide thumbs Also See for 800:

Table of Contents

CONFIGURING

USING A COMPUTER

• Click Select this source when product is switched on

this source should be selected when the DVD/CD player is switched on

from standby with a key other than a source key.

This would usually be chosen as either DVD or CD.

To specify the audio connections

• Click the Audio tab to show the connections for the audio inputs:

• Select the card in the Card list to specify the location of the connector

used for the source.

To use the internal DVD/CD drive select DV02 , the DVD controller.

• From the Input on card drop-down menu specify the digital or

analogue audio input you want to use for the source, or Last valid to

leave the input unchanged when you select the source.

If you have chosen an analogue input for the main audio input:

• Specify the sensitivity of the input by choosing an appropriate option

from the Sensitivity drop-down menu.

to specify that

Table of Contents