Selecting A Source - Meridian 800 User Manual

USING THE DVD/CD
PLAYER PREAMPLIFIER
FEATURES
Your installer may have
customised the labels displayed for
each source to suit your other
equipment.
The DVD/CD player mutes the
sound while you change source.

Selecting a source

If you are using the 800 Reference DVD/CD Player as a controller you can
connect up to 11 other sources to it, and select them from the front panel
or remote.
The DVD/CD player provides the following 12 sources:
CD, Radio, LP, TV, Tape 1, Tape 2, CDR, Cable, DVD, VCR1,
VCR2, LDisc.
The DVD and CD sources usually correspond to the
internal drive(s).
The input associated with each of the other sources depends
on how the DVD/CD player has been set up; for more information
refer to the Configuring the DVD/CD player using a computer, page 55.
To select a source
• Press Source (under the front panel) until the display shows the source
you want, or press the appropriate source key on the remote; eg CD.
The display shows the source and volume setting.
For example, if you select the Radio
source the display might show:
Radio
32
65