Using As A Windows Network Printer; Installing The Pcl Or Rpcs Printer Driver - Ricoh LD225 Function Manual

Preparing the Machine

Using as a Windows Network Printer

Installing the PCL or RPCS Printer Driver

To use the print server, install the printer driver by selecting "Network printer
server", and then select the Windows 2000 / XP, Windows Server 2003, or Win-
2
dows NT 4.0 shared printer.
This section assumes that the client has already been configured to communicate
with a Windows 2000 / XP, Windows Server 2003, or Windows NT 4.0 print
server. Do not begin the following procedure before the client is set up and con-
figured correctly.
Important
❒ To install the printer driver under Windows 2000 / XP Professional, Win-
dows Server 2003, and Windows NT 4.0, you must have an account that has
Manage Printers permission. Log on as an Administrators or Power Users
group member.
❒ If you print with a print server connected to the printer using the SmartDe-
viceMonitor port, Recovery Printing and Parallel Printing cannot be used
from the client.
❒ If you print with a Windows XP or Windows Server 2003 print server, notifi-
cation functions of SmartDeviceMonitor may not be used with the client.
❒ If you print with a Windows NT 4.0 print server, install the printer driver be-
fore you connect the print server to the printer.
A
Quit all applications currently running.
B
Insert the CD-ROM into the CD-ROM drive.
The installer starts.
Auto Run may not work with certain operating system settings. In that case,
launch "Setup.exe" on the CD-ROM root directory.
C
Select an interface language, and then click [OK].
The default interface language is English.
D
Click [PCL/RPCS Printer Drivers].
E
The software license agreement appears in the [License Agreement] dialog
box.
After reading the agreement, click [I accept the agreement.], and then click [Next >].
F
Select the printer driver you want to use in the [Select Program] dialog box.
You can select several printer drivers.
G
Click [Next >].
34