Ricoh LD225 Function Manual page 124

Note
❒ You can set Collate in the RPCS printer driver.
• If you cannot make Shift collate even with the optional finisher installed,
options may not be set up correctly in the printer driver. Correct the printer
driver's option settings. For details, see the printer driver Help.
❒ If Auto Continue occurs on the first set, Collate will be canceled.
❒ If forced printing occurs on the first set, Collate will be canceled.
❒ If a document with mixed paper sizes or sizes larger than A4, 8
it can only be collated, even if Rotating collate has been selected.
❒ If the following functions are selected, Collate or Shift collate will be applied
even if Rotating collate is selected:
• Covers
• Slip sheet
❒ When Rotating collate has been selected, printing speed will be slower than
with other collate functions.
❒ When setting Collate in the printer driver settings, make sure that a collate
option is not selected in the application's print settings. If a collate option is
selected, printing will not be as intended.
❒ The Rotating collate function requires two paper trays containing same size
paper but in different orientations.
Reference
For information about paper sizes and the number of sets you can use Collate,
Rotating collate, and Shift collate with in every option, see Copy Reference.
For printing methods, see the printer driver Help.
Collate
× 11 is set,
1
/
2
117
4