SOLE E55 Owner's Manual page 26

your workout. If you want to change the personal settings then just follow the instructions in the
message window. If you start a program without changing the settings the default, or saved,
settings will be used.
NOTE: Age and Weight default settings will change when you enter a new number. So the last Age
and Weight entered will be saved as the new default settings. If you enter yourAge and Weight the
first time you use the Elliptical you will not have to enter it every time you work out unless either
your Age or Weight changes or someone else enters a different Age and Weight.
Manual
The Manual program works as the name implies, manually. This means that you control the
workload yourself and not the computer. To start the Manual program follow the instructions below
or just press the Manual button then the Enter button and follow the directions in the message
window.
9. Press the Manual key then press the Enter key.
10. The message window will ask you to enter your Age. You may enter your Age, using the Up
and Down keys or the numeric key pad, then press the Enter key to accept the new number
and proceed on to the next screen.
11. You are now asked to enter your Weight. You may adjust the Weight number using the Up
and Down keys or the numeric key pad, then press enter to continue.
12. Next is Time. You may adjust the Time and press enter to continue.
13. Now you are finished editing the settings and can begin your workout by pressing the Start
key. You can also go back and modify your settings by pressing the Enter key. NOTE: At any
time during the editing of Data you can press the Stop key to go back one level, or screen.
14.Once the program starts you will be at level one. This is the easiest level and it is a good
idea to stay at level one for a while to warm up. If you want to increase the work load at any
time press the Up key; the Down key will decrease the work-load.
15. During the Manual program you will be able to scroll through the data in the message
window by pressing the Enter key.
16. When the program ends you may press Start to begin the same program again or Stop to
exit the program or you can save the program you just completed as a custom user
program by pressing a User key and following the instructions in the message window.
Preset Programs
The Elliptical has five different programs that have been designed for a variety of workouts. These
five programs have factory preset workload and incline profiles for achieving different goals.
Hill
The Hill program simulates going up and down a hill. The resistance in the pedals will steadily
increase and then decrease during the program.-
Work Profile Incline Profile
25
E55 / E95 Elliptical