Table of Contents
Advertisement
TUNER PRESET
You can customize this special tuning system so that it will
select only your personal choice of channels. When the Pro-
jection Monitor leaves the factory, all possible channels are
in TUNER PRESET.
Using the menu function you can add or delete channels to
or from TUNER PRESET to suit your tastes.
TUNER PRESET can be set to match your personal prefer-
ences among the channels available
in your area. Please
refer to your local TV or cable program
guide. Follow the
procedures
below to customize TUNER PRESET to your re-
quirements.
Removing channels from TUNER PRESET
Turn on the monitor
and set the input seFeetor to
mode.
.'_
Turn on the MENU ON/OFF
button, and press the ME-
NU SELECT/ADJUST
buttons until the TUNER PRE-
SET display turns red.
r_
Press the MENU SET button. The channel numbers ap-
pear on the screen.
Press the MENU SELECT/ADJUST
buttons until the
channel number to be deleted blinks (the preset chan-
nel numbers
are displayed
in green).
Press the MENU SET button to delete the currently se-
lected channel
from TUNER
PRESET.
The blinking
number turns red. The red numbers
show the deleted
channel numbers.
Repeat steps _
and
_5." to delete additional unde-
sired channels.
_._ Press the MENU
ON/OFF
button after presetting
is
completed.
Adding
channels
to TUNER
PRESET
Turn on the monitor end set the input selector to TV
mode.
Turn on the MENU ON/OFF
button, and press the ME-
NU SELECT/ADJUST
buttons until the TUNER PRE-
SET display turns red.
Press the MENU SET button. The channel numbers ap-
pear on the screen,
Press the MENU
SELECT/ADJUST
buttons until the
channel number to be added blinks. (The deleted chan-
nel numbers are displayed
in red.)
_,_
Press the MENU SET button to add the currently select-
ed channel to TUNER PRESET. The blinking number
turns green. The green numbers show the added chan-
nel numbers.
Repeat steps
_L_ and _
to add additional desired
channels.
!_
Press the MENU
ON/OFF
button after presetting is
completed.
Now you can recall the preset channels by preseung the re-
mote control CHANNEL
"+" and "--" keys or the control pan-
el CHANNEL
"+" and "-"
buttons.
MENU ON/OFF
button
_IQTAL
_
I1_ p
p_ESET
M_NU
i
S_T
[
"IV CHANNEL key
MENU SELECT/
/
ADJUST buttons
MENU SET button
Other memory features
The Projection Monitor also remembers many other settings
related to day-to-day
operation. So when you turn the moni-
tor on, it comes up with your previous channel and volume
settings. It also remembers your previous picture quality set-
tings.
32
Advertisement
Table of Contents
