Pioneer SD-P4053 Operating Instructions Manual page 18

Projection monitor receiver
Table of Contents

Advertisement

REMOTE
CONTROL
UNIT FACILITIES
Picture-in-Picture
functions
Any one of the three sources connected to the Projection Monitor
can be displayed simultaneously
on a sina!! area of the screen.
while one of the other sources is being watched on the main screen,
"ro turn the Picture-in-Picture
function
on and off
Press the P IN P key repeatedly to turn the sub-picture on and off,
TO replace the main screen
picture with the sub-picture
Press the SWAP key 'Each time this key is pressed, the main screen
and the sub-picture wit1switch positions
To change
the position
of the sub-picture
Press the SHIFT key repeatedly.
Each time this key is pressed,
the sub-picture will move (counterclockwise) to a different corner
of the main screen.
To select the input source of the sub-picture
while wat-
ching the main screen
Press the TV, LO, VIDEO 1, VIDEO 2 or VIDEO 3 INPUT SELECTOR
key. When the INPUT key on the remote control unit is pressed, the
selected video source for the sub-picture will be dis01ayed tie. video
disc playback, TV program or video cassette tape playback).
Sub-picture input display
When using the picture-in-picture
function,
press the INPUT
key to display the sub-picture
input source above (or below) the
sub-picture.. Press the DISPLAY key to display the input source
of the main picture in the upper right hand corner of the screen
Sub-picture
mode will appear in the lower left corner of toe
screen,
P IN P Key
INPUT Key
STILL key
MULT_ key
'" ...............
I
r'_
SWAP Key
|
STROBE key
/
SHIFT Key
To watch a still picture m'_the main screen
Press the STILL key to freeze the picture, The sound track will
continue to play back normally, but t;le picture will freeze.
To cancel still or picture-In-picture
function
Press the STILL key again, The screen will be reset to normal
mode. Alternatively,
press the P IN P key to cancel the picture-
in-picture function.
Picture-in-Picture function using the Multi-
screen feature
The multi*screen
feature can select 4 subscreen
mode or 9
subecreen mode, and the strobe or manuat factures.
[]
Press the P IN P key to turn the picture-in-picture
function
]
on.
Press the MULTi key repeatedly to select 1, 4 or 9 scren.
When selecting
4 subscreen
or 9 subscreen
mode, the
main screen will disappear
and 4 or 9 subscreen
will ap-
pear on the screen, The lower right hand corner of the
screen plays back normally. If the 1 screen mode is select-
ed, the m_an screen will reappear.
[]
Press the STROBE or SHIFT key,
When the STROBE key Is pressed, the picture will be dis-'
played at specific intervals. At each interval, a still picture
appears in one of the 4 (or 9) screens. The final screen pic-
ture plays back normally. Press the SHIFT key repeatedly if
you wish to change the active subecreen's
position. The
subscreen
selected most recently will play back normally.
[]
To oance_ the muLti*picture teatu[e:
Press the MULTI key. The main and sub-screen will reappear
Alternatively, press the P IN P key to canoe! the picutre-in-
picture function.
9 screen mode
4 screen mode
18

Advertisement

Table of Contents
loading

Table of Contents