Table of Contents
Advertisement
INSTALL ,Ti0H
ANTENNA
CONNECTION
Connect to an outdoor antenna, cable box or centralized an-
tenna terminal (see page 12 for details)•
MOUNTING
Downward
si:_l lights or fluorescent
lights in an overhead
•Honey*
comb'
prevent 0irect illumination
of the screen¸
The Projection Monitor is designed
to be placed on the floor
or on a sturdy platform. The mounting surface should be flat
and steady.
INSTALLATION PRECAUTIONS:
Place of Installation
eWhen the Projection Monitor is operating, it is cooled by
air-flow through ventilation holes in the rear and bottom.
Therefore, avoid placing it in a location where the cooling
air-flow is hindered (e.g. against e waft).
eAvoid
places subject
to extremely high temperatures or
humidity, or to temperatures
of 41 °F (5 *C) or lower. Also
avoid dusty places.
oDe not set the Projection Monitor in an unstable location
(such as on a shaky or tilted platform).
• When setting the Projection Monitor on a floor made of soft
material, make sure that the floor is not damaged by the
weight of the Projection Monitor.
elf the room temperature sudden/), rises (or if the Projection
Monitor is moved from a cool place to a hot place), con-
densation may form on the lenses, resulting in picture dis-
tortion or color fading. /f this occurs,
simply wait a while
(with the POWER SW/TCH on) and the condensation will
disappear•
Cover
shiny surfaces
(floor and
walls)
with
non-reflective
materials,
tcamet,
rugs, wallpaper,
etc.)
OPERATING P RECAUTIONS
Keep away from magnetic
fields
The picture may be distorted if strong magnetic fields are
nearby. External speakers should be set at least 2 feet (60
cm) away from the Projection Monitor. Electric fans and
other motor driven appliances
and toys may also be sources
of magnetism.
When
moving
the monitor
Pull out the plug and move the monitor carefully. Be particu-
larly careful not to bump or scratch the screen. To avoid
damage to the caster wheels you may need to lib the monitor
when going over irregular surfaces.
Install in a flat, steady
place
Do not put the Projection Monitor on a surface that is tilted,
unsteady or prone to shake or vibrate• A shaky or slanted
platform is dangerous•
Adjust
room illumination
Excessively
bright or dim lighting may strain your eyes. Draw
the curtains if necessary to shut out direct sunlight.
When
not using the monitor
for a long time
For safety, unplug the power cord when leaving the monitor
,
turned off for a long period of time.
Condensation
and picture
blurring
eYou may see a blurred picture if the monitor is moved from
a coot to a warm location or if room temperature rises very
rapidly. This occurs when moisture from the air condenses
on the optical parts.
eThe picture will return to normal if you leave the monitor
turned off for 1 or 2 hours, then turned on.
eA gradual change in temperature
can prevent condensa-
tion from forming,
A word abou_ still pictures
oDe not project a stiff picture on your Monitor for a long pen-
ed of time.
(For example:
when using your Monitor for video games,
monitoring
your personal computer,
or while playing back
videodiscs.)
This can adversely affect the monitor's CRT. if
this cannot be avoided, reduce the contrast of the picture
in order to minimize any damage which might occur
6
Advertisement
Table of Contents
