Pioneer SD-641HD5 Operating Instruction
  1. Manuals
  2. Brands
  3. Pioneer Manuals
  4. Receiver
  5. SD-641HD5
  6. Operating instruction
Pioneer SD-641HD5 Operating Instruction

Pioneer SD-641HD5 Operating Instruction

Projecttion monitor receiver
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
PROJECTION MONITOR RECEIVER
SD-641HD5
Operating Instructions

Advertisement

Table of Contents
loading

Related Manuals for Pioneer SD-641HD5

Summary of Contents for Pioneer SD-641HD5

  • Page 1 PROJECTION MONITOR RECEIVER SD-641HD5 Operating Instructions...
  • Page 2 FEATURES Progressive Scan/HDTV READY Highly Detailed Image Display Technology The tinted 0.52mm ultrafine-pitch screen, Hi Band Video Dual System Component Input for NTSC/ Amplifier circuit, Progressive contour correction circuit and various other technologies for creating high picture quality Progressive make the display of highly detailed images possible. Connection to a DVD player with a component output terminal makes possible high-picture-quality display superior to that of Lens System for HDTV...

  • Page 3: Important Notice

    Thank you for purchasing this PIONEER Projection Monitor WARNING: Receiver. TO REDUCE THE RISK OF THE FIRE OR Please read the precautionary instructions enclosed with these operating instructions please do so before proceeding. ELECTRIC SHOCK, DO NOT EXPOSE THIS After learning how to operate the Projection Monitor, be sure APPLIANCE TO WET LOCATIONS.
  • Page 4 The following symbols are found in this WARNING manual and on the labels on the product. This symbol refers to a hazard or unsafe They alert the operators and service practice which can result in severe personal personnel of this equipment to potentially injury or death.
  • Page 5 Do not subject your Monitor to 11-1. Do not place this Monitor on an impact of any kind. Be particularly unstable, uneven or an inclined careful not to damage the screen location. The Monitor may surface. overturn, causing serious injury (to a person), and serious damage Unplug the Monitor from the wall to the appliance.
  • Page 6 An outdoor antenna system For added protection during a should not be located in the lightning storm, or when it is left vicinity of overhead power lines/ unattended and unused for long electric lights or power circuits, or periods of time, unplug the where it can fall onto such power Monitor from the wall outlet and lines or circuits.

  • Page 7: Table Of Contents

    CONTENTS INTRODUCTION INSTALLING THE MONITOR ............. 8 BEFORE USE ................10 TO WATCH TV TO WATCH TV ................. 12 Viewing two screens (SPLIT screen) ..........Making notes on program content (FREEZE screen) ......Searching for a program on a different channel (SEARCH screen) .. ADJUSTMENTS AND SETTINGS CHECKING THE MENU ............

  • Page 8: Installing The Monitor

    • Handle the screen with care to avoid scratches or damages. • While the Projection Monitor is operating, it is cooled by • Ask your dealer or a Pioneer authorized service center to airflow through ventilation holes in the rear and bottom.
  • Page 9 INSTALLING THE MONITOR 4. Attach side frame covers: CAUTION: BEFORE ATTACHING THE PROTECTIVE SCREEN 1) Peel off adhesive strip from rear side of the frame cover. • Do not handle the screen by yourself. (It weights 12.4 lbs/6.0 kg) 2) Attach side frame cover along the aluminium edge guards Have someone assist you when attaching or carrying the screen leaving a space of approximately 0 to 1/32 in.

  • Page 10: Before Use

    BEFORE USE Before you watch the TV, perform the following procedure. Connect the cables of the VHF antenna and UHF antenna to the ANTENNA A terminal. (See page 33) Mixer ANTENNA /CABLE Connect the CATV converter to the ANTENNA B terminal. (See page 33) CATV converter...
  • Page 11 BEFORE USE Inserting batteries into the remote control unit CAUTION Incorrect use of batteries may lead to leakage or rupture. Always be sure to follow these instructions. Never mix new and used batteries. Two DURACELL ® 'AA' MN1500 1.5V ALKALINE dry cell batteries Batteries of the same size may have different voltages depending on their type.

  • Page 12: To Watch Tv

    TO WATCH TV Best Horizontal and Vertical Viewing Angle The optimum viewing angle is 140˚ in horizontal and 45˚ in vertical. 45˚ Watch from at least 10 feet (3m) away from the screen (optimum viewing distance is 10 to 23 feet). 140˚...

  • Page 13: Adjust The Volume

    TO WATCH TV VHF L VHF H SUPER HYPER 7-13 14-69 A-5(95) A(14) J(23) Q(30) W+1(37) W+11(47) W+21(57) W+31(67) W+41(77) W+51(87) W+61(102) W+71(112) W+81(122) A-4(96) B(15) K(24) R(31) W+2(38) W+12(48) W+22(58) W+32(68) W+42(78) W+52(88) W+62(103) W+72(113) W+82(123) A-3(97) C(16) L(25) S(32) W+3(39) W+13(49) W+23(59)

  • Page 14: Viewing Two Screens (Split Screen)

    TO WATCH TV VIEWING TWO SCREENS (SPLIT screen) The screen can be split vertically, making it possible to view different images on the left and right. Press the SPLIT button. TV CBL /SAT POWER POWER INPUT SPLIT SEARCH SELECT SPLIT SCREEN SUB CH MODE...

  • Page 15: Searching For A Program On Adifferent Channel (Search Screen)

    TO WATCH TV SEARCHING FOR A PROGRAM ON A DIFFERENT CHANNEL (SEARCH screen) The screen on the right side can be made into nine or three different screens, making it possible to search for programs or enjoy multiple images. TV CBL /SAT POWER POWER...

  • Page 16: Checking The Menu

    CHECKING THE MENU Press MENU on the remote control unit. EDIT/ The MAIN MENU will be displayed on the screen. MENU MENU LEARN SOURCE Select the desired menu item using 5 or ∞ button of the remote GUIDE POWER POWER control unit, and press SET/ENTER button to perform the SET/ ENTER...
  • Page 17 CHECKING THE MENU SCREEN setting menu (See page 28) PICTURE SOUND SCREEN SCREEN C N EMA W I D E SET UP A U T O O F F SET/ SET/ ENTER ENTER V . P O S I T –...

  • Page 18: Picture Adjustments

    PICTURE ADJUSTMENTS This device has three types of picture quality settings in memory. You can select your favorite from them or set the picture quality you desire and store it in memory. RECALL THE DESIRED SETTINGS TV CBL /SAT Press MENU and select PICTURE by POWER POWER using the 5 or ∞...

  • Page 19: Storing The Set Picture Quality In Memory

    PICTURE ADJUSTMENTS STORING THE SET PICTURE QUALITY IN MEMORY USER mode can be set for each input source: TV and INPUT 1 to INPUT 4. Select the input source and show the TV CBL /SAT image on the screen. POWER POWER INPUT SPLIT...

  • Page 20: To Adjust The Picture Quality

    PICTURE ADJUSTMENTS TO ADJUST THE PICTURE QUALITY The CONTRAST, BLACK LEVEL (brightness), COLOR, TINT and SHARP (sharpness) can be adjusted. Press MENU and select PICTURE . TV CBL /SAT (Refer to page 16.) POWER POWER INPUT Select the adjustment item. SPLIT SEARCH SELECT...

  • Page 21: Other Picture Quality Adjustments

    PICTURE ADJUSTMENTS OTHER PICTURE QUALITY ADJUSTMENTS The following six fine adjustments are available. 1 3D Y/C LEVEL 2 3D NR LEVEL 3 CNR (Color Noise Reduction) 4 COLOR TEMP (Color Temperature) 5 FLESH TONE TV CBL /SAT POWER POWER INPUT Press MENU and select PICTURE .
  • Page 22 PICTURE ADJUSTMENTS 2 To adjust 3D NR LEVEL Reduces the noise level of the luminance and chromanance signals when there is S-VIDEO input. NOTE: This function can be used only when viewing a source that has been connected to the S-VIDEO input terminal. TV CBL /SAT Select 3D NR LEVEL .
  • Page 23 PICTURE ADJUSTMENTS 4 To adjust COLOR TEMPERATURE This function enables the image to be set to three different tones. Select COLOR TEMP . PICTURE O T H E R TV CBL 3 D Y / C L E V E L : 3 /SAT 3 D N R L E V E L : 3 SET/...
  • Page 24 PICTURE ADJUSTMENTS After setting, press MENU to turn the menu off. MENU TV CBL /SAT POWER POWER INPUT SPLIT SEARCH SELECT SCREEN SUB CH MODE AUTO FREEZE DISPLAY ENTER ¢ RETURN MUTING EDIT/ LEARN MENU MENU SOURCE GUIDE POWER POWER SET/ ENTER ∞...

  • Page 25: Sound Adjustments

    SOUND ADJUSTMENTS WATCHING STEREO AND BILINGUAL PROGRAMS The multichannel TV sound (MTS) decoder enables stereo program and Second Audio Program (SAP) to be received. (SAP is often used for a second language). This MTS decoder can only be used if a broadcast of stereo program or SAP is received.

  • Page 26: To Adjust The Sound Quality

    SOUND ADJUSTMENTS TO ADJUST THE SOUND QUALITY BASS, TREBLE and BALANCE can be adjusted. Press MENU and select SOUND . (Refer to page 16.) TV CBL /SAT POWER POWER INPUT Select the adjustment item. SPLIT SEARCH SELECT SCREEN SUB CH SOUND MODE AUTO...

  • Page 27: To Select The Desired Surround Mode

    SOUND ADJUSTMENTS TO SELECT THE DESIRED SURROUND MODE Virtual surround can be selected as desired. Press MENU and select SOUND . TV CBL /SAT (Refer to page 16.) POWER POWER INPUT SPLIT SEARCH SELECT Select SURROUND . SCREEN SUB CH MODE AUTO FREEZE...

  • Page 28: To Change Screen Size

    TO CHANGE SCREEN SIZE SETTING SCREEN MODE The size of the picture or the picture's range projected on the screen can be changed between five screen sizes. Press the SCREEN MODE button. TV CBL /SAT POWER POWER INPUT SCREEN MODE SPLIT SEARCH SELECT...

  • Page 29: To Switch The Screen Size Automatically

    TO CHANGE SCREEN SIZE TO SWITCH THE SCREEN SIZE AUTOMATICALLY The screen size can be automatically switched to what is appropriate for the image being viewed. TV CBL /SAT AUTO SCREEN CAN BE TURNED ON AND OFF USING THE REMOTE CONTROL POWER POWER INPUT...
  • Page 30 TO CHANGE SCREEN SIZE SELECTING AUTO SCREEN FROM THE MENU SCREEN Press MENU and select SCREEN by using the 5 or ∞ button and then pressing SET/ENTER. (Refer to page 16.) TV CBL /SAT POWER POWER Select AUTO SCREEN in the same way. INPUT SPLIT SEARCH...

  • Page 31: To Adjust The Screen Position

    TO CHANGE SCREEN SIZE TO ADJUST THE SCREEN POSITION In the CINEMA WIDE or ZOOM mode, the screen position can be adjusted to the top or bottom. Press MENU and select SCREEN . TV CBL (Refer to page 16.) /SAT POWER POWER INPUT...

  • Page 32: Closed Caption Decode Function

    CLOSED CAPTION DECODE FUNCTION The closed caption broadcasting multiplexes Press MENU and select CC by using the caption signals (character information) in the video signal to allow the displaying of characters on the 5 or ∞ button and then pressing SET/ screen.

  • Page 33: Connecting The Antenna

    CONNECTING THE ANTENNA • A good color picture depends on a good TV Connecting a VHF/UHF antenna signal. So does good multichannel (stereo program and SAP) sound. Ask your dealer for ANTENNA /CABLE advice on how to install your external antenna to receive the best possible signal.

  • Page 34: Connecting Other Equipment

    CONNECTING OTHER EQUIPMENT INPUT jacks COMPONENT VIDEO INPUT jack There are 4 sets of inputs for VCR and DVD/LD players. Use Inputs three signals – Y, P ) and P ) – output from DVD RCA-type pin plug cords (the same as those used in Hi-Fi players and the like.
  • Page 35 CONNECTING OTHER EQUIPMENT SIGNAL DVD/LD player OUTPUT AUDIO VIDEO S-VIDEO SIGNAL CONTROL ANTENNA INPUTS /CABLE INPUT 1 INPUT 2 INPUT 3 SIGNAL OUTPUT INPUT S-VIDEO MONITOR CENTER VIDEO AUDIO (MONO) AUDIO AUDIO FIXED /VAR COMPONENT VIDEO OUTPUT SIGNAL Rear panel Use these terminals to input signals from a DVD player which has component video output terminals [(Y, C...
  • Page 36 CONNECTING OTHER EQUIPMENT CONNECTION WITH RECEIVER (1) The audio signal output from this unit can be reproduced on • Before making or changing connections, set the power the receiver when this monitor is connected to the receiver. switch to off and unplug the power cord from the AC outlet. When this monitor is connected to the CENTER OUT terminal •...
  • Page 37 CONNECTING OTHER EQUIPMENT SPEAKER and AUDIO OUT settings Press MENU and select SET UP by using the 5 or ∞ button and then pressing SET/ TV CBL ENTER. (Refer to page 16.) /SAT POWER POWER INPUT Select SYSTEM IN/OUT in the same way. SPLIT SEARCH SELECT...
  • Page 38 CONNECTING OTHER EQUIPMENT Select AUDIO OUT . If the speaker mode was set to CENTER IN in step 4, the AUDIO OUT mode will automatically change to FIXED, and VAR cannot be selected. SET UP TV CBL /SAT S Y S T EM I N / S P E A K E R : N O POWER POWER...
  • Page 39 CONNECTING OTHER EQUIPMENT CONNECTION WITH RECEIVER (2) This unit can be used as the monitor for the receiver when this • Before making or changing connections, set the power unit is connected to the receiver. When this unit is connected switch to off and unplug the power cord from the AC outlet.

  • Page 40: Connecting The System Remote Control

    CONTROL CONTROL NOTES: • When the Pioneer unit with Î mark is connected to the CONTROL IN terminal of the projection monitor, the remote sensor of the projection monitor does not accept signals from the remote control unit. In this case, point the remote control at the first device in the chain (the equipment with no CONTROL IN connection).

  • Page 41: Remote Code Set Up

    • If the table on page 42 does not include your desired manufacturer or the remote control does not work, you can make the memory learn its signal by the learn mode (see page 43). • The initial mode is “00” (PIONEER). <ARB1526>...
  • Page 42 REMOTE CODE SET UP Manufacturer's preset remote control signals CBL/SAT DVD/LD PIONEER 1 (CABLE) PIONEER PIONEER (DVD) PIONEER 2 (CABLE) FISHER PANASONIC (DVD) JERROLD 1 (CABLE) FISHER SAMSUNG (DVD) JERROLD 2 (CABLE) FISHER SONY (DVD) JERROLD 3 (CABLE) GOLD STAR...

  • Page 43: To Learn Remote Control Signals

    REMOTE CODE SET UP TO LEARN REMOTE CONTROL SIGNALS To operate other manufacturers' remote control signals not preset using the remote control unit, have the remote control unit learn these signals. Example) To learn the VCR power to turn on. Before operation: TV CBL /SAT...
  • Page 44 REMOTE CODE SET UP • Buttons which can be learnt are as follows. Face the remote control unit of the other CABLE ..SOURCE POWER, CH (+), CH (–), CH RETURN, CH ENTER, 1 to 9, 0 manufacturer's and the remote control SAT ...

  • Page 45: Remote Control Unit Functions

    This button is used for performing operations in dark places. ENTER RECEIVER CONTROL BUTTONS ¢ RETURN When a Pioneer receiver is connected to the Monitor, the MUTING receiver can be operated using buttons 4 to 6. When another company’s receiver is connected to the Monitor, EDIT/ have the signals for 4 to 6 learned (see page 43).
  • Page 46 REMOTE CONTROL UNIT FUNCTIONS MONITOR (TV) CONTROL BUTTONS Set the mode switch to TV. Mode switch 1 TV POWER button (STANDBY/ON) Turns the power of the monitor on and off. TV CBL /SAT 2 Input Selector buttons (TV, INPUT 1 to INPUT 4) Press the button to select the source you wish to watch.
  • Page 47 REMOTE CONTROL UNIT FUNCTIONS 0 SPLIT/SEARCH screen buttons SPLIT: Press to turn the SPLIT screen function on and off. SEARCH: Press to select the SEARCH screen mode. SELECT: Selects the screen for switching the channel or Mode switch input source.* FREEZE: When this button is pressed with the regular screen, the screen will change to the SPLIT...
  • Page 48 REMOTE CONTROL UNIT FUNCTIONS CABLE CONTROL BUTTONS CABLE and SAT cannot be selected at the same time. Mode switch When the mode switch is set to CBL/SAT the cable converter connected to the Monitor can be operated using the buttons 1 to 5.
  • Page 49 REMOTE CONTROL UNIT FUNCTIONS SAT CONTROL BUTTONS CABLE and SAT cannot be selected at the same time. Mode switch When SAT is preset by REMOTE CODE SET UP , the remote control unit buttons will function as shown below. • When a satellite broadcast tuner is connected to the TV CBL /SAT...
  • Page 50 REMOTE CONTROL UNIT FUNCTIONS VCR CONTROL BUTTONS If the VCR is preset by REMOTE CODE SET UP, the remote Mode switch control unit button will function as follows when the mode switch of the remote control unit is set to VCR. When the input selector button having the same number as the input terminal connecting the VCR is pressed, the VCR can TV CBL...
  • Page 51 REMOTE CONTROL UNIT FUNCTIONS DVD/LD CONTROL BUTTONS DVD and LD cannot be selected at the same time. Mode switch If the DVD/LD is preset by REMOTE CODE SET UP , the remote control unit button will function as follows when the mode switch of the remote control unit is set to DVD/LD.

  • Page 52: Setting At Installation

    SETTING AT INSTALLATION TO AUTOMATICALLY PRESET CHANNELS IN YOUR AREA The broadcast frequencies that can be received depend on your area. Memorize the broadcast stations that can be received in your area in the preset. TV CBL /SAT Select TV. POWER POWER INPUT...
  • Page 53 SETTING AT INSTALLATION Select TV/CABLE MODE , then select the broadcast system to be received from AIR, CATV STD, CATV HRC or CATV IRC. Ask your dealer or cable service station for the mode of your local CATV system. TV CBL /SAT POWER POWER...

  • Page 54: To Add Or Delete Preset Channels

    SETTING AT INSTALLATION TO ADD OR DELETE PRESET CHANNELS Broadcast stations preset by auto channel preset which are unnecessary can be deleted. Broadcast stations to be watched that were not preset by auto channel preset can be preset. ADD ... Manually presets channels that were not preset by AUTO CHANNEL PRESET.
  • Page 55 SETTING AT INSTALLATION Select CHANNEL , then select a channel. SET UP C H A N N E L A D D / D E L A N T E N A : A C H A N N E L : 1 2 5 SET/ S E T T I N : D...
  • Page 56 SETTING AT INSTALLATION Select LABEL and input the label characters. When ADD has been selected in step 6, a label of 4 characters can be input for the added channel. SET UP TV CBL /SAT C H A N N E L A D D / D E L A N T E N A : A POWER...

  • Page 57: Favorite Channel Set Up

    SETTING AT INSTALLATION FAVORITE CHANNEL SET UP Assigning your favorite channels to the four buttons (blue, green, red and yellow) on the remote control unit makes it easy to call them up. Four channels can be assigned to each button, making it possible to set a total of 16 channels.

  • Page 58: Select The Channel

    SETTING AT INSTALLATION Select antenna. SET UP F A V O R I H A N N E L Y E L L OW A N T SET/ SET/ ENTER ENTER TV CBL /SAT ∞ POWER POWER E X I T USE: END: MENU...

  • Page 59: The Color-Convergence Deviation By Earth Magnetism

    SETTING AT INSTALLATION THE COLOR-CONVERGENCE DEVIATION BY EARTH MAGNETISM Earth magnetism may deviate the color misconvergence in some areas. After setting up the TV, or if the picture color is misconverged, be sure to realign color convergence, after the TV has warmed up for 30 minutes or more.
  • Page 60 SETTING AT INSTALLATION Move the red line onto the green line. Move the vertical line. O N V E R G E N C E SET/ TV CBL /SAT ENTER POWER POWER ∞ INPUT USE: END: MENU SPLIT SEARCH SELECT Move the horizontal line.
  • Page 61 SETTING AT INSTALLATION If the test cross is not white, press the SET button. TV CBL /SAT SET/ S E S A T P O I N T ENTER POWER POWER INPUT USE: END: MENU SPLIT SEARCH SELECT SCREEN SUB CH MODE AUTO FREEZE...

  • Page 62: To Adjust The Picture Quality Automatically To Room Brightness (Dpo)

    SETTING AT INSTALLATION TO ADJUST THE PICTURE QUALITY AUTOMATICALLY TO ROOM BRIGHTNESS (DPO) The sensor of the DPO (Dynamic Picture Optimizer) on the TV front panel determines brightness and adjusts the CONTRAST, BLACK LEVEL TV CBL /SAT (brightness) and COLOR automatically. POWER POWER INPUT...

  • Page 63: To Select The Desired Language On The Menu Screen

    SETTING AT INSTALLATION SETTING AT INSTALLATION TO SELECT THE DESIRED LANGUAGE ON THE MENU SCREEN From the three available languages, select the one you would like want the text of the menu screen to be displayed in. (See pages 66 to 71.) TV CBL Press MENU and select SET UP .

  • Page 64: Front Panel Functions

    FRONT PANEL FUNCTIONS A flip-down door conceals the control panel. Push gently and 1 POWER STANDBY/ON indicator release, to open the door. To close the door, lift it back up into place. 2 DPO sensor Sensor to detect the room brightness. NOTE: If you accidentally pull the door, it may not shut properly.

  • Page 65: Volume Buttons

    If the normal operation cannot be restored after the above When this button is pressed while adjusting the outer treatment, immediately unplug the power cord and call your point convergence, the outer point convergence returns nearest PIONEER-authorized service center. to the initial mode. NOTE: 8 VOLUME buttons On rare occasions, an electrical discharge may occur inside the CRT.

  • Page 66: Menu Index

    MENU INDEX Main menu (See page 16) PICTURE adjustment menu (See page 18) PICTURE PICTURE SOUND MO D E : S T D SCREEN C O N T R A S T B L A C K L V L . SET UP C O L O R T I N T...
  • Page 67 MENU INDEX SET UP menu (See page 37) CHANNEL SET UP menu (See page 52) SET UP SET UP C H A N N E L S E C H A N N E L S E C O N V E R G E N C A U T O C H A N N D P O : O F F C H A N N E L...
  • Page 68 MENU INDEX Menú AJUSTE VIDEO (Vea la página 18) Spanish menu screen See page 63 for instructions on selecting the desired language. AJUS.VIDEO MO D O : E S T . C O N T R A S T E B R I L L O C O L O R Menú...
  • Page 69 MENU INDEX Menú PREPARACIÓN (Vea la página 37) Menú AJUSTE CANAL (Vea la página 52) PREPARA. PREPARA. A J U S T E C A N A A J U S T E C A N A L C O N V E R G E N C B O S Q U E D A D P O : A P .
  • Page 70 MENU INDEX Menu RÉGLAGE IMAGE (Voir la page 18) French menu screen See page 63 for instructions on selecting the desired language. G.IMAGE É MO D E : S T D . C O N T R A S T E L UM I N O S C O U L E U R Menu principal (Voir la page 16)
  • Page 71 MENU INDEX Menu INSTALLATION (Voir la page 37) Menu RÉGLAGE CANAL (Voir la page 52) INSTALL. INSTALL. G L A G E C A G L A G E C A N A L É É C O N V E R G E N C R E C H C H E D P O : A R...

  • Page 72: Troubleshooting

    Sometimes the trouble may lie in another component. Investigate the other component and electrical appliances being used. If the trouble cannot be rectified even after exercising the checks listed below, ask your nearest PIONEER authorized service center or your dealer to carry out repair work.
  • Page 73 TROUBLESHOOTING The following symptoms may be mistakenly regarded as malfunctioning. In many cases, they are not the faults of the Monitor. SYMPTOM CAUSE When there are 2 or 3 layers of images Influence of waves from the broadcast stations reflected by nearby mountains and (ghost phenomenon) high-rise buildings.

  • Page 74: Specifications

    SPECIFICATIONS Display and amplifier section Electrical section, miscellaneous Reception system ..American TV standard NTSC system Power requirements ........120 V AC, 60 Hz Screen size ..............64" Power consumption ......343 W, 650 VA (CSA) CRT ............. 7" High focus CRT x 3 External dimensions ..
  • Page 75 <ARB1526>...
  • Page 76 Should this product require service in the U.S.A. and you wish to locate the nearest Pioneer Authorized Independent Service Company, or if you wish to purchase replacement parts, operating instructions, service manuals, or accessories, please call the number shown below.

Table of Contents