Table of Contents
Advertisement
REMOTE
CONTROL
UNIT FACILITIES
To display the picture
of several
television
stations
us-
ing the channel
scan feature
The channel scan feature can display 4 or 9 television station p=c-
tures at the same time. The stations which have been memonzed
in the TV tuner will be displayed on the split screen.
All the displayed pictures will appear as stillimages when the chan-
nel scan feature is engaged.
[]
Press the TV INPUT SELECTOR key or press the INPUT
SELECTOR button repeatedly until a TV program appears
[]
Press the CH SCAN key to display the first 4 stations on
the screen. The memorized
TV stations will appear in order
from the top left corner to bottom right corner of the screen,
[]
Press the MULTI key repeatedly to select 4- or 9-screen mode.
The selected TV station will al3peer in the sub-screen in the
upper left corner of the screen.
[]
To display the next group of memorized TV stations:
Press the CH SCAN key again.
Press the CH SCAN key repeatedly to select the memorized
stations you wish to watch.
[]
TO cancel the channel scan feature:
Press the PtN P key again.
If you wish to select a station when the channel scan feature
is engaged,
Press the direct channel selection pad you wish to select.
• Press the DISPLAY key to reappear channel numbers on the
screen.
Direct channel selectionpad
!
i
,---1 p--1
F--1
I
CH SCAN key
Attention
Do not use the Picture-in-Picture
function
for more than 2
hours. It may damage
the picture
tubes inside the Projection
Monitor.
If you wish to this function
for more than 2 hours,
change the sub-picture position on the screen every once in a
while by pressing the SHIFT key.
NOTES:
olf only the _
LD and VIDEO jacks are used to con-
nect the LD palyer and VCR to the Projection Monitor, the Pic-
ture-in-Picture
function
will not operate when these buttons
and keys are pressed.
o The sound of the sub-picture(s)
cannot be heard when the
Picture-in-Picture system is engaged.
eWhen
a copy-protectad
tape is played
back in the mian
screen, the sub-picture
may be distorted.
• With some VCRs, the screen may fluctuate, when the VCR is
not in playback
mode. This is not a malfunction.
• TV channels can be selected with the TV CHANNEL +/-
key
or the direct channel selection pad when the 73/key of the IN-
PUT SELECTOR is pressed. Both the main screen and the
subpicture
will change TV channels at the same time when 73/
channels are selected.
o Signals output from the Projection Monitor will not be altered
when the Picture-in-Picture
function is engaged.
Only the main picture signal is sent through the monitor output
lacks.
• The picture -in -picture function will be cancelled automatically
ff none of the picture-in-picture
control keys or CH SCAN key
are pressed for more than 8 minutes when still mode, multi-
mode or channel scan mode is engaged.
• If the input signal (including burst signal) is not supplied to the
main screen, the picture-in-picture
function
will not function
properly.
• During stillplayback, special effect playback, or when search-
ing an LD or video cassette tape visually forward or backward
usig the main screen, shaking may occur in the sub-picture.
• After the multi-screen
feature is engaged,
input to the sub-
screen cannot be changed by pressing the INPUT key. If you
wish to change the input, press the MULTI key to cancel the
multi-screen
mode or select one sub-picture
mode, and se-
lect the desired input source of main. Then ee/ect the multi-
screen feature again.
• Sub-picture
mode only appear ff the main screen signalis not
supplied on the monitor when turn the picture-in-pictura
func-
tion on. Pictures will appear on both the main screen and sub-
picture when the main screen signal is supplied.
• If any TVprogram
is received or TVprogram
is tuned in clear-
ly, black and white picture will appear m the sub-picture
when
the CH SCAN key is pressed. If this happens, select a TV pro-
gram tuned in clearly, then press the CH SCAN key.
• Channel scan feature can display only memorized
TV stations
which can be tuned using the TV tuner of the monitor.
If tt_e RF terminal of the CA TV converter is connected
to the
monstor, channel scan feature can display CA TV converter se-
lected station only. not aft the stations memorized
in the CA TV
converter.
19
Advertisement
Table of Contents
