Pioneer SD-P4053 Operating Instructions Manual page 25

HOW TO ALIGN COLOR CONVERGENCE
Color convergence alignment without
using the remote control unit
Color convergence adjustment can be performed by either
the operation keys of the remote control unit as described in
operation 4 of the above procedures, or the MENU SE-
LECT/ADJUST buttons and MENU SET button on the con-
trol panel as described below:
Press the MENU SET button to select the adjustment
mode. The adjustment modes appear in the following
order:
eConvergence adjustment test pattern and arrow will
appear on the screen accordingly,
Red-vertical ..,. R ed-horizontal
r+adjustment adjustment _
(*L_Blue-horizontal .. Blue-vertical
adjustment adjustment
* Alignment proof mode; selected image only appeares.
Use the SELECT/ADJUST buttons as follows:
During Red or Blue Vertical adjustment
Press the + button to move the horizontal line
upwards.
Press the -- button to move the horizontal line
downwards.
During Red or Blue Horizon_a_ adiaetment
Press the + button to move the vertical line to the
right.
Press the -- button to move the vertical line to the
left.
MENU ON/OFF button
L_Tt=L _*F_ _=
DRESET
MENU r_
T
MENU SELECT/ADJUST
Buttons MENU SET button
25