Remote Control Setup - Philips DVD740VR Owner's Manual

74 Remote Control Setup
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • m
Putting Batteries in the Remote Control
Remove the battery compartment lid on the bottom of the remote control by pressing the tab, then lifting the
lid.
Place two AA batteries inside the battery compart-
ment with their + and - ends aligned as indicated.
Replace the battery compartment lid.
Using the Remote Control
Point the remote control at the DVD/VCR's remote sensor
(see page 20) when using the remote control to operate the
DVD/VCR. Do not point the remote control at the TV.
@ Do not put objects between the remote control and the
DVD/VCR.
Recycling GuidelineslBattery Safety
Your new product and its packaging contain materials that can
be recycled and reused. Specialized companies can recycle your
product to increase the amount that needs to be properly dis-
posed. Your product uses batteries that should not be thrown
away when depleted but should be disposed of as small chemi-
cal waste. Please find out about the local regulations on disposal
of your old product, batteries, and packaging whenever you
replace existing equipment.
Battery Usage CAUTION - To prevent battery leakage that
may result in bodily injury or damage to the unit:
Install ALL batteries correctly, with the + and - markings on the
battery aligned as indicated on the unit;
Do not mix batteries, for example, old with new or carbon with
alkaline; and
Remove batteries when the unit will not be used for a long
time.
2
_©_
3