Philips DVD740VR Owner's Manual page 11

Hookups (cont'd) 11
DVDIVCR to a TV that has Audio and Video In jacks
Using the supplied red, white, and yellow cables
This connection will let you use the features of both the VCR and the DVD Player.
Audio and
Video [*' '
on
Antenna or
Cable TV
Signal to
ANT-IN Jack
Video Cable
_ 2 Audio Cables
1
2
3
4
Connect the antenna or Cable TV signal to the ANT-IN (Antenna
In),jack of your DVDNCR.
Connect the red and white audio cables (supplied) to the red and
white DVD/VCR AUDIO OUT jacks on the DVD/VCR and to the red
and white AUDIO IN jacks on the TV, matching the cable colors to
the jack colors, If the TV has a single AUDIO IN jack, use the white audio
cable to connect the DVD/VCR's white DVD/VCR AUDIO OUT jack to the
TV's AUDIO IN jack. You will not use the red cable.
Connect the yellow video cable (supplied) to the DVD/VCR VIDEO
OUT.jack on the DVDIVCR and to the VIDEO IN,jack on the TV.
For better DVD picture quality, connect an S-Video cable (not supplied) to the S-
VIDEO OUT jack on the DVD/VCR and to the S-VIDEO IN jack on the TV instead.
However, the S-Video connection only supplies video (picture) for the DVD Player of
the DVD/VCR. Therefore, in order to use the VCR features or view TV channels at
the DVD/VCR, you still need to either connect the RE coaxial cable between the
ANT-OUT jack of the DVD/VCR and the TV's Antenna In jack, or connect the yellow
video cable as described earlier. To connect the supplied RF coaxial cable, see step 2
on page eight.
Connect the power cords of the TV and the DVD/VCR to a power
outlet. Turn on the TV and set it to the correct Audio/Video In
channel. If you are using the red/white/yellow audio/video cables for VCR or
DVD playback, choose the Audio/Video In channel at your TV. If you are using
the S-Video cable for DVD playback, choose the S-Video In channel at your
TV. If you are using the RF coaxial cable for VCR or DVD playback, choose
channel 3 or 4 at the TV. See your TV owner's manual for more details. Or,
simply continue changing channels at the TV until you see VCR or DVD play-
back on the TV screen.
You are ready to turn on the DVD/VCR. Go to page 15 before turn- ing on the DVDNCR.