Programmed Playback - Philips DVD740VR Owner's Manual

60 Programmed Playback
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • m
[AUDIO CD 1
You may determine the order in which Tracks will play, The
order that you set is called the Program, To set up programmed
playback, follow these steps,
@ Before you begin, place the DVD/VCR in DVD mode,
Press OUTPUT SELECT so the red DVD light appears on the
front of the DVD/VCR,
While playback is stopped, press DVD, then press MODE. The PROGRAM screen will appear.
2
rt4_t m EXIT m
, ,J
Press the Number buttons to enter the number of
the first Track that you want to play.
_ If you enter a wrong Track number, press CLEAR. The
last Track in the Program will be removed.
_ Enter single-digit Tracks with a single Number button.
}:or example, for Track three, press the Number 3 but-
tOn.
_ For Tracks 10 and above, press the +10 button, then the
Number button for the first digit, then the Number but-
ton for the second digit, For example, to play Track 26,
press the +10 button, then press the Number 2 button,
then press the Number 6 button.
PHILIP$
3
4
Repeat step 2 until you have entered all the Tracks
you wish to play in the Program. The total playing
time of the Program appears beside TIME at the top of the
PROGRAM screen.
Press PLAY I_ (A). The Tracks will play in the order in
which you programmed them. The Program will play once.
You can not combine specific track
or random playback with pro-
grammed playback.
You may play a Program repeated-
ly. During programmed playback,
press REPEATso REPEAT [TRACK]
or REPEAT [ALL] appears. The cur-
rent Track or the entire Program
will play repeatedly.
To see which Tracks you stored in
the Program, press MODE during
playback.
Track numbers that are not avail-
able on the Audio CD will be reject-
ed and erased. Enter a valid Track
number.
Turning off the DVD/VCR or open-
ing the disc tray will erase the
Program.