Remote Control Setup 13; Putting Batteries In The Remote Control; Using The Remote Control - Philips DVP3345VB User Manual

Putting Batteries in the Remote Control

1
Remove the battery compartment lid on the
bottom of the remote control by pressing the tab, then
lifting the lid.
2
Place two AA (1.5 V) batteries inside the
battery compartment with their + and – ends aligned
as indicated.
3
Replace the battery compartment lid.

Using the Remote Control

●
Point the remote control at the DVD/VCR's remote sensor (see
page 18) when using the remote to operate the DVD/VCR. Do
not point the remote at the TV.
●
Do not put objects between the remote and the DVD/VCR.
Recycling Guidelines/Battery Safety
●
Your new product and its packaging contain materials that can
be recycled and reused. Specialized companies can recycle your
product to increase the amount that needs to be properly
disposed. Your product uses batteries that should not be
thrown away when depleted but should be disposed of as small
chemical waste. Please find out about the local regulations on
disposal of your old product, batteries and packaging whenever
you replace existing equipment.
●
Battery Usage CAUTION - To prevent battery leakage that may
result in bodily injury, property damage or damage to the unit:
• Install ALL batteries correctly, with the + and – markings on
the battery aligned as indicated on the unit.
• Do not mix batteries, for example, old with new or carbon
with alkaline.
• Remove batteries when the unit will not be used for a long
time.

Remote Control Setup 13

1
2
3