Table of Contents
Advertisement
TITLE MAKING
You can easily create and record personalized titles on your videos with the Camera/Recorder's
built-in titler.
The titler will store 2 different title pages in memory.
Once a title is stored, it can be displayed and recorded at any-
time.
Each title page can contain one line of 16 characters each.
The character contains 47 different characters for creating titles.
"PAGE
(PLAY)" Button
"SHIFT
(STOP)" Button
-) and (+) Buttons
"TITLE"
Button
[] Creating a Title
1. Attach a power source to the Camera/Recorder
and
press "POWER"
ON/OFF
Button on.
NOTE: "VCR/CAM'"
Select Switch may be "VCR"
or "CAM".
2. Press "TITLE"
Button. The flashing cursor will ap-
pear in the viewfinder.
5. After you have selected the first character, press
"SHIFT"
Button to move the flashing cursor to the
place you want the next character,
3. Press "SHIFT"
Button repeatedly to move the flash-
ing cursor to the place you want to begin your title.
4. Select the first character for your title by pressing the
(--)
or (+)
Button repeatedly until the desired
character appears.
NOTE: Each title can contain up to one line of 16
characters each.'A
chart showing the characters
contained in the registers is located below.
,L
6. Repeat steps 4 and 5 until you have completed the
title.
LUCKY B_Y:
NOTE:
Character may flash, however it will be
recorded correctly without flashing.
7. After completing
your title, press "PAGE"
Button
and create the title on another title page.
8, After creating the title, press "TITLE"
Button to re-
move the title graphics from the vievvfinder. Now
title graphics is stored in memory.
m Chart
of Characters
available
by
using the
CHARACTER
control
ABCDEFGHIJKLM
NOPQR
STUVWXYZ0123456789
?'./,-;:
< > !
-29-
Advertisement
Table of Contents
