Table of Contents
Advertisement
MEMORY
When the linear time counter with memory indication
appearsin the viewfinder, a tape that is being rewound
automatically stops when the counter reads "0:00:00".
This is useful if there is a section of tape you want to
review immediately after recording or if you want to
return to the same point several times in a row.
1. Press "DISPLAY"
Button until the linear time coun-
ter is displayed.
2. Press "MEMORY"
Button. (The indication "M" ap-
pears on the display).
3. Start playing or recording a tape.
4. At the point you want playback to start, press
"'RESET/T-160'"
Button
to reset the counter to
"0:00:00".
5. Continue to play or record.
6. Press "STOP"
Button.
7. Press "REW"
Button.
The tape will be rewound to
the preselected point, at "0:00:00"
indication.
NOTE: The tape
will
also stop
approximately
at
"0:00:00"
during fast forward mode.
E---F
0:]2:86M
"'REW" Button
"STOP"
Button
"'RESET/T-160"
Button
"DISPLAY"
Button
TIME REMAiNiNG
When
the linear
time counter
is present
in the view-
finder,
pressing
"DISPLAY"
Button
again will change
the display to a read-out
showing
the amount
of record-
ing or playback
time left on the tape.
Pressing
"DIS-
PLAY"
Button
once more clears all graphics
from
the
viewfinder.
NOTE:
When using an extended
length T-160 cassette,
you must
press "RESET/T-160""
Button
to adapt the
camera/recorder's
time remaining
system
for an accu-
rate read-out.
(If the linear time counter
is being
dis-
played,
"RESET/T-160""
Button
resets the counter
to
"0:O0:00".)
"'RESET/T-160"
Button
"DISPLAY"
Button
Advertisement
Table of Contents
