Table of Contents
Advertisement
9. After recording, set "VCR/CAM'"
Select Switch
to "'VCR",
and the Camera/Recorder will be now
in the stop mode.
"VCR/CAiVI"
Select Switch
13. Press "POWER"
ON/OFF
Button off and then
"EJECT"
Button to remove cassette.
"POWER"
ON/OFF
Button
"EJECT"
Button
10. Press "REW"
Button.
The tape will be rewound to
the beginning.
11. Press "PLAY"
Button.
The picture
you just
recorded will be seen through the Viewfinder and
sound can be heard by earphone (Not supplied).
NOTE: If you connect the Video Camera/Recorder
to your TV, you can see the picture played back on
your TV.
Refer to VIEWING
THE PICTURE
PLAYED BACK ON YOUR TV" on pages 32 and
33.
12. After playing, press "'STOP"
Button.
14. Always remove the power source from the Video
Camera/Recorder after use.
"REW"Bu_on
"PLAY"Bu_on
"STOP"Bu_on
To prevent an accidental
erasure of recorded
material:
If you have a cassette tape that has already been
partially recorded on and you want to record on the
remaining blank section, see "EDIT SEARCH" on
page 37.
-12--
Advertisement
Table of Contents
