Table of Contents
Advertisement
DATE/CLOCK
SETTING
The date and clock can be recorded on your tapes to act as a handy reference when viewing them at a later time.
Use the following procedure to set 0p this display for the'current
date and time.
Pu_._._o
MA...Am
--[--[--------L._
i "SELECT'°
Button
"ENTER"
Button
"DATErTIME
ON/OFF"
Button
1. Load the camera/recorder's
date/clock
battery as
described on page 8.
2. Turn on power of Camera/Recorder.
3. Set "VCR/CAM"
Select Switch to "'CAM".
4. Press "DATE/TIME
ON/OFF"
Button.
Date and time appear in the viewfinder and "1"
flashes.
_I_ :OOAM
,,I_/1190
5. Press "SELECT"
Button to select correct month.
Hold Button down to advance rapidly. When the
correct month appears, press "ENTER"
Button.
I
12 :_.O,_AM
1 l / _I_/90
6. Press "SELECT"
Button to select,correct date,
Hold Button down to advance rapidly.
When the
correct date appears, press "ENTER"
Button.
1
12:OOA_, I
11/5/.s, j
7. Press "SELECT"
Button to select year, and then
press "ENTER"
Button.
] 1'/ 5/9o
8. Press "SELECT"
Button
as many times as may be
required
to select
correct
hour,
and then
press
"ENTER"
Button.
9. Repeat step 8 to select minute
and AM/PM.
6:3DAM
11/ 5/90
10. After setting AM or PM, press "ENTER"
Button
again to erase the flashing cursor and start the
internal clock.
NOTES:
o To
correct date/clock
information
during pro-
gramming or after starting the date/clock,
press
"ENTER"
Button until the incorrect digit is flashing.
Then use "SELECT"
Button to enter the correct
digit.
• The date/clock graphics will be recorded whenever
they appear in the viewfinder. To display date and
clock together, press "DATE/TIME
ON/OFF".
To
display date only, press "DATE/TIME
ON/OFF"
:again.
Pressing "DATE/TIME
ON/OFF"
a third
time removes both graphics.
Advertisement
Table of Contents
