Table of Contents
Advertisement
[] Correcting Errors During Programming
1, Press"SHIFT"
Button repeatedlyuntil the Character
to be corrected flashes.
2. Press either "'--"
or "+"
Button until the correct
character appears.
NOTE: The corrected character may flash, however
it will be recorded correctly without flashing.
"'--'" or "' -F "' Button
I "'SHIFT"
Button
......
[] Recording Titles on Another VCR while playing
.....a-Tape Back with the Camera/Recorder
1. Connect the Camera/Recorder and VCR.
(See page 38.)
2. Select the title you wish to record (from page ! or
page 2).
The last title selected will appear first.
Press
"TITLE"
Button to turn title off.
3. Set
the
VCR
in
the
recording
mode
and
Camera/Recorder in the playback mode,
4. Press ,"TITLE"
Button when you see the scene
where you want to record the title,
5. Press "TITLE"
Button to erase the display from the
viewfinder.
m Recording
Titles
on a Tape in the Camera/
Recorder
1. Press "POWER"
ON/OFF
Button on and set
"VCR/CAM"
Select Switch to "'VCR".
2. Locate the position on the tape that you wish to
record the title.
3. Set "VCR/CAM"
Select Switch to "'CAM",
4. Press "TITLE"
Button to display the title graphics,
5. Press "PAGE"
Button until the title you wish to
record appears in the viewfinder.
6. Press Record Start/Stop
Button or "PAUSE/
[_"
Button to start the title recording.
7, Press "TITLE"
Button to remove the title graphics
from the viewfinder.
The Camera/Recorder
will now record as normal.
Advertisement
Table of Contents
