Table of Contents
Advertisement
AUDIO DUBBING
The audio dubbing feature lets you record new audio (sound) on a previous recorded tape without erasing the original
video (picture).
When you audio dub a tape, the previous audio is erased and replaced with new sound.
To
"VIDEO
IN"
(Yellow)
AUDIO IN"
(White)
To "AV
IN"
Audio/Video
Input Cable 1_)
J
Audio/Video
Output Cable
(Accessory No. 4)
(_) Optional--not
supplied
See page 2 for ordering information.
To "AV OUT"
To "AUDIO
OUT"
(White)
"MIC"
®
@
NOTES: o Sound from the built-in microphone,
external microphone and the AV IN jack can be dubbed.
• Do not connect the "'AV IN" jack when dubbing audio from the external microphone or built-in micro-
phone.
Connecting an external microphone also switches off the built-in microphone automatically.
1. Insert a recorded tape.
Be sure that the record safety tab is not missing.
2. Set "VCR/CAM"
Select Switch to "VCR".
3. Play the tape and press "'PAUSE/_'"
Button
where you want to dub audio.
o The Camera/Recorder
enters the still play mode.
4. Press "AUDIO
DUB" and "'PLAY"
Buttons at the
same time.
o "A.DUB"
appears in the viewfinder.
5. Press "PAUSE/r-RE_"
Button
to
start
audio
dubbing.
6. Press "STOP"
Button to stop audio dubbing.
NOTE: If counter memory "M"
appears in the view-
finder, the tape stops automatically
at the reading of
"'0:00:00" and audio dubbing stops.
"'VCR/CAM"
Select Switch
"PLAY"
Button
"STOP"
Button
"PAUSE/[_]"
Button
"AUDIO
DUB" Button
-- ?4--
Advertisement
Table of Contents
