Table of Contents
Advertisement
VIEWING THE PICTURE PLAYED BACK ON YOUR TV
To play back a tape recorded on your Video Camera/Recorder
and view it on your TV receiver, you must connect
the Video Camera!Recorder to the TV receiver using either Audio/Video
OutputCable
(Accessory No. 4) or RF Con-
verter Unit (Optional Accessory).
You may also play back the tape recorded by your Video Camera/Recorder
on any other VHS video cassette
recorder. The Video Camera/Recorder records and plays back in VHS standard speed (SP). A tape recorded in long
play (LP) or extra long play (EP) cannot be played back on this Video Camera/Recorder.
Example 1: If your TV is a regular TV,
•
UHF Antenna
VHF Antenna
TV
Camera/Recorder
_==This is an adaptor of
To "'AV OUT"
75/300-ohm combination
!l
type and may be used
]
as applicable.
,_
I
Coa, al Cable
with Antenna Adaptor
(_}
Antenna Adaptor
(_)
/
To "IN
FROM
ANT"
To "OUT
TO TV"
(*) Optional--not
supplied,
See page 2 for ordering
information.
RF Converter
Unit
(_)
1. Disconnect
the VHF antenna leads from the rear of
the "IV receiver.
NOTE:
Leave the UHF antenna leads connected
to
the "IV.
2. Connect the VHF antenna
lead to "IN
FROM
ANT"
on the RF Converter Unit.
If the cable is
round (75-ohm), it will connect directly to the "IN
FROM ANT".
If it is the flat type (300-ohm), con-
nect it to the Antenna Adaptor and slip the Adaptor
on to the "'IN FROM ANT" terminal.
Advertisement
Table of Contents
