Video Camcorder To Vcr Dubbing/ Editing - Sears LXI series 580.55914490 Owner's Manual

VIDEO CAMCORDER TO VCR DUBBING/EDITING
If you wish to dub, copy or edit some of your video camcorder home movie recordings, the following instructions
can be used to connect the video camcorder to VCR for this purpose.
Video Camcorder:Play
TV
ANT
Record
To "AUDIO IN"
Audio/Video Output Cable
_ IOOO0_o00o ODD
-7 =n0oD000,o 00j
I t _OODOODI_ =
To "VIDEO IN"
1. Connect audio/video output cables to "A/V OUT"
of your video camcorder.
2. Connect the other ends to "AUDIO IN", "VIDEO
IN" respectively.
3. Play the tape on the video camcorder and record
it on the VCR.
NOTE: If you connect the "VHF OUT TO TV
connector of VCR to the "TV ANT" connector, as
illustrated and set "VCR/TV" Selector of the VCR to
"VCR" mode, the picture being dubbed by VCR can
be monitored.
3O