GE Profile PTDN850GM0WW Owner's Manual And Installation Instructions page 15

Installation Instructions
UNPACKING YOUR DRYER
Tilt the dryer sideways and remove the foam
shipping pads by pulling at the sides and breaking
them away from the dryer legs. Be sure to remove
all of the foam pieces around the legs.
Remove the bag containing the drying rack,
literature and serial cable.
LOCATION OF YOUR DRYER
IMPORTANT:
Gas dryers are not approved for
mobile home installation.
MINIMUM CLEARANCE OTHER THAN
ALCOVE OR CLOSET INSTALLATION
Minimum clearance to combustible surfaces and
for air openings are:
, 1 inch clearance both sides
, 1 inch front
, 5 inches rear
Consideration must be given to provide adequate
clearance for proper operation and service.
DRYER DIMENSIONS
Front View
iliL ,,_
a
27"
(68.6 cm)
45"
(114.5 cm)
15
Side View
)
51"
(129.5 cm)
29"
(73.7 cm) -_
377A''
(96.3 cm)