Ice Dispenser - GE 19 Use And Care & Installation Manual

ICE DISPENSER
(on some models)
]1
How the Ice Dispenser Works
When the selector switch is set at ICE CUBES...
(1) The automatic icemaker fills the
(2) ice storage bin_
(3) Pushing on the ice cradle activates the
(4) motor-powered auger which moves the ice
cubes into glass through the
(5) chute°
When the selector switch is moved to CRUSHED
ICE, a flipper' directs the cubes through the
(6) crusher and crushed ice falls through the chute.
Spills are caught in the
(7) spill shelf's.
A newly-installed refrigerator may take
8 to 12 hours to begin making ice.
it
CAUTION: Never put fingers or anyother
objects into the ice crusher discharge opening.
Before Ushlg Your Ieemaker and Dispenser
If your refrigerator is operated
before the water connection is
made, remove the ice storage
bin and make sure the icemaker
feeler arm is in the STOP (up)
position.
When the refrigerator has been
connected to the water supply, move
the feeler arm to the ON (down) position_
The icemaker will fill with water' when it cools to
freezing. A newly-installed refrigerator may take
8 to 12 hours to begin making ice cubes_
Once Your Icemaker is in Operation
When the water supply
has been connected to the
icemaker, remove the ice
storage bin, move the
icemaker feeler' an'n to the
ON (down) position, and
replace the bin,
To remove the ice storage
bin, lift the front of the bin and
pull the bin straight out while
supporting it at front and rear..
To replace the ice storage bin:
Slide it back on the ice bin shelf°
If the bin does not go all the way
back, remove it and rotate the
drive mechanism 1/4 turn. Then
push the bin back again°
(continued next page)
Features vary by model ]
13
g_
_t
I
I
J
i
i
i
I