GE 19 Use And Care & Installation Manual page 24

TO R|V| E HARDWAR|GH CSIHET
T_$_R B@TTGMKgHGEBP_CKETTG THE LEFT,
a. Remove the base _ne, Grasp it at the bottom
and pull it straight out.
J
Bottom right
Plastic washer
b. Using a Torxdfiver, remove the hinge bracket
and plastic washer from the bottom fight side
of the cabinet.
Pla stic washe r""'-_. __i_ I
:7----
c. Reinstall the hinge bracket and plastic
washer to the bottom left side of the cabinet.
............ I'NI"llll,, ill i,1,1_ ii,l_l_
24
I_] T_$F|R CEHTR HIIHG| B_CK|T TOTfl| Ut"T.
Do not remove this screw
I
J
Center right
a. Remove the center hinge bracket by removing
the three Torx screws. NOTE: Keep these
screws with the hinge bracket. They are
longer screws and will be used when
installing the hinge on the other side.
b. Remove the three Torx screws from the center
left side of the cabinet. Screw them into the holes
on the right side, which were uncovered in Step
(a) above.
l
Center left
0 7-
Place the center hinge bracket over the holes at
the center left side of the cabinet, insert the three
screws that were removed with the center hinge
bracket in Step (a) and tighten them.
]'_ TRANSF|R TOP HBHG|TO TK| IEJ:T.
Interchange hinge and screws at top right with
screws at top left of cabinet Do not tighten
screws on hinge side at this time.
[4] TUNSFER DOOR STOPS.
a. On each door, move the metal door stop from
the fight end to the left end.
b. Move any screws from the left end to the
fight end.