Racks - GE Quick Set V Owner's Manual

Care and cleaning of the range,
Oven
frame
Doo[
frome,,,,_, / /
_'_-__uttons
Lift-Off Upper Oven Door (on some models)
To remove the door'.
r-fJ Fully open the door.
r_ Lift up on the hinge lock toward the oven
frame until they stop.
r_ Close the door to 45 degrees (youwill feel
the door stop).The hinge lock will contact
the oven frame.
r_ on both sides of the door, press down on
the release buttons on each hinge. []
[] Lift door up until it is clear of the hinge.
[]_] Pullon hinge arms slightly to relieve []
pressure on the locking tabs.
[] Pushthe hinge locks down onto the hinge. I-z-]
To replace the door'.
EZ] Pullthe hinges down away from the oven
frame to the fully open position.
r2] Lift up on the hinge locks toward the oven
frame until they stop.
r_ The hinges will release to the 45-degree
position.The hinge locks will contact the
oven frame.
Slide the door back onto the hinges. Make
sure the buttons pop back out.
Fully open the door.
Pushthe hinge locks down onto the hinge.
Close the oven door.
r_ Pushthe hinges in toward the unit so they
are closed.
[L
i[
Oven RGcks
Fiatrack
Handles
Use the rack with the two front
handles in the upper oven.
All oven racks may be cleaned by hand with an
abrasive cleaner or steel wool. After cleaning,
rinse the racks with clean water and dry with a
clean cloth. Gray porcelain-coated oven racks
may remain in the oven during the self-cleaning
cycle without being damaged. The nickel-plated
oven racks may remain in the oven during the
self-cleaning cycle, but they will lose their luster
Use the rack without the two front
handles in the lower oven.
and become hard to slide. It will be necessary
to grease all oven rack side edges with a light
coating of vegetable oil after cleaning them by
hand or in the oven. This will help maintain the
ease of sliding the racks in and out of the oven.
38