GE Monogram ZFSB23DRBSS Owner's Manual page 27

The Problem Solver
Stainless Steel H_(/_'ig'eralor
Questions ?
Use this
prob#m
solver, t
PROBLEM POSSIBLE CAUSE
FOOD ISN'T
THAWING/CHILLING
ACTUAL
TEMPERATURE
NOT EQUAL TO
SET TEMPERATURE
SELECTTEMP
FEATURE IS
NOT WORKING
DOORS ARE
NOT ALIGNED
• Packaging insulating fl)o(1. Increase time or re-package in plastic.
• The wrong weight is selected. Select a larger weight.
• Item with high tat content. Select a larger weight.
• Not using (_hill/Thaw tray. Place items on tray and allow space in
between items tin" better air flow.
• Unit just plugged in. Allow 24 horn's tin _the svstem to stabilize.
• Door open ti)i" too hmg. Allow 24 hours ti)i" the system to stabilize.
• X,Varln tood added to refl'igerator. Allow 24 hours for the svsteln
to stabilize,
• Defl'ost cycle is in process. Allow 24 horn's fin" the system to stabilize.
• Fresh tood compartment tempera tm'e control is set at the warm est
setting. This is normal. In order to minimize energy usage, the
SEI,ECTTEMP teattlre is disabled when the fresh tood compartment
temperatm'e control is set at the warmest setting.
• Unlevel floor.
A()iust
rollers then align doors by a(!iusting the fl'esh
fi)od compartment hinge. See Installation lnst_ uctions.
27