Setting The Serving Size - Miele CM 5200 Operating Instructions Manual

The coffee machine is equipped with
portion programing. You can program
the amount of water used for each
portion of espresso, coffee or hot water
to suit your taste and cup size.
For drinks prepared with milk, you can
also set the duration of the steam used
for heating or frothing the milk. You can
also program the amount of hot milk
and froth.
There is a maximum amount which can
be programmed for each type of drink.
Preparation stops when this is reached.
The maximum portion size possible for
that type of drink will then be saved.
There are two ways to program the
portion amount; either:
– when preparing a drink, or
– if you call up PROG. THE AMOUNT
in the SETTINGS menu.
If there is insufficient water in the
water container, the process will be
stopped. The portion size will not be
saved.
TIP You can cancel programming the
amount as long as CANCEL is visible in
the display.

Setting the serving size

Setting the serving size when
making a drink
Press the ., /, H or k button for at least
3 seconds to program the amount for
that particular drink.
For caffè latte, milk froth, hot milk and
hot water you can start portion size
programming by pressing the
OK button for at least 3 seconds after
selecting the drink
Setting portion size for espresso and
coffee
^ Place the desired cup under the main
dispenser.
^ Press and hold the . or / button until
PROG. THE AMOUNT appears in the
display.
The selected drink will be prepared and
SAVE will appear in the display.
^ Press the OK button when the cup
has been filled to the level you want.
The portion size programmed will now
be dispensed every time that particular
drink is selected.
31