Setting The Serving Size; Setting The Serving Sizes While Preparing Beverages - Miele CVA6405 Operating And Installation Instructions

Setting the serving size

The flavor of a coffee beverage
depends not only on the type of coffee,
but also on the quantity of water used.
You can adjust the amount of water
used for each portion of espresso,
coffee or hot water to suit your cup size
and the type of coffee used.
For beverages prepared with milk, you
can also adjust the milk and milk froth
ratio in addition to the espresso or
coffee size. You can also program the
portion sizes of hot milk and froth.
There is a maximum amount which can
be programmed for each type of drink.
Preparation stops when this is reached.
The maximum portion size possible for
that type of beverage will then be
saved.
The changed beverage size is
always stored in the current profile.
The name of the current profile is
shown at the top left of the display.
There are two ways to program the
portion amount:
– Using the beverage keys if you
prepare a coffee beverage, or
– Selecting "Beverage size" in the
"Parameter" , menu.
Tip: You can cancel the amount
programming while "Stop" is displayed.
If there is insufficient water in the
water tank during preparation, the
coffee machine will stop the
programming. The beverage amount
will not be saved.
30
Setting the serving sizes while
preparing beverages
Setting the serving sizes for
Espresso ., Coffee / and Lungo
coffee /
^ Place the desired cup under the main
dispenser.
^ Tap ., / and / until the display
shows "Change".
The desired beverage is prepared and
the display shows "Save".
^ Once the cup is filled to your desire,
tap the OK button.
The portion size programmed will now
be dispensed every time that particular
beverage is selected.