Setting The Portion Size - Miele CVA 6805 Operating And Installation Instructions

Setting the portion size

The flavour of the coffee produced
depends on the type of coffee, how
finely the beans are ground and the
quantity of water used.
You can programme the amount of
water used for espresso, coffee or hot
water to suit the size of your cup and
the type of coffee you are using.
For coffee made with milk, in addition to
programming the portion size of coffee
you can programme the amount of milk
and milk froth used. You can also
programme the portion size for hot milk
and froth.
There is a maximum amount which can
be programmed for each type of drink.
Preparation stops when this is reached.
The maximum amount possible for that
type of drink will then be saved.
The changed portion size is always
saved in the current profile. The
name of the current profile is shown
in the top left of the display.
If there is insufficient water in the
water container, the process for
programming the amount will be
stopped and the amount will not be
saved.
36
Setting the portion size
Start in the drinks menu.
^ Place the desired cup under the
central spout.
^ Touch "Process".
^ Touch "Change drink".
^ Swipe the screen until the drink you
want appears and then touch this.
^ Touch "Change the portion size".
The required drink will be prepared and
"Save" will appear in the display.
^ Touch "Save" when the cup has been
filled to the level you want.
If you want to change the portion size
for cappuccino, latte macchiato or
caffè latte, the ingredients
(components) which make up the drink
will appear in the display.
Cappuccino: milk froth, espresso
Latte macchiato: hot milk, milk froth,
espresso
Caffè latte hot milk, coffee
^ Touch the ingredients you want to
programme the portion size for.
The ingredients selected will have a tick
9 beside them.
^ Touch "OK".