Table of Contents
Advertisement
^ Carefully pull the brew unit out of the
coffee machine.
If you cannot remove the brew unit
easily, the brew unit is not in the correct
position (see "Frequently asked
questions").
After the brew unit has been
removed, do not alter the position of
the brew unit handle.
This would displace the brew unit
and it would not fit back into the
coffee machine.
^ Clean the brew unit by hand under
hot running water without soap.
^ Wipe any coffee from the two filters.
One filter is located in funnel a and
the other to the left of funnel b.
^ Dry funnel area a to prevent ground
coffee sticking to it.
^ Clean the inside of the coffee
machine Use your vacuum cleaner to
remove dry coffee grounds.
Cleaning and care
To replace the brew unit, repeat the
previous steps in the reverse order:
^ Push the brew unit back into the
coffee machine, making sure it is
straight.
^ Press the button on the end of the
handle of the brew unit a and while
doing so turn the handle clockwise
b.
^ Close the door. Turn the flaps 90°
counterclockwise. Lower the flaps.
55
Hide quick links:
Advertisement
Table of Contents
