Setting The Serving Size - Miele CVA 6805 Operating And Installation Instructions

Setting the serving size

The flavor of a coffee beverage
depends not only on the type of coffee,
but also on the quantity of water used.
You can adjust the amount of water
used for each portion of espresso,
coffee or hot water to suit your cup size
and the type of coffee used.
For beverages prepared with milk, you
can also adjust the milk and milk froth
ratio in addition to the espresso or
coffee size. You can also program the
portion sizes of hot milk and froth.
There is a maximum amount which can
be programmed for each type of drink.
Preparation stops when this is reached.
The maximum portion size possible for
that type of beverage will then be
saved.
The changed beverage size is
always stored in the current profile.
The name of the current profile is
shown at the top left of the display.
If there is insufficient water in the
water tank during preparation, the
coffee system will stop the portion
programming. The portion will not be
saved.
32
From the "Drinks" menu:
^ Place the desired cup under the main
dispenser.
^ Touch "Edit".
^ Touch "Change drink".
^ Swipe the display until the beverage
you want appears and then touch it.
^ Touch ""Change the portion size".
The desired beverage is prepared and
the display shows "Save".
^ Touch "Save" when the cup has been
filled to the desired amount.
If you want to change the portion size
for Cappuccino, Latte macchiato or
Caffè latte the ingredients which make
up the drink will appear in the display.
Cappuccino: milk froth, espresso
Latte macchiato: hot milk, milk froth,
espresso
Caffè latte: hot milk, coffee
^ Touch the ingredients for which you
want to program the portion size.
The selected ingredients have a check
mark 9 beside them.
^ Touch "OK".