Controlling The Display Contrast/Backlight - Zoom Handy Recorder H4 Operation Manual

Miscellaneous Settings
the setting, and then press the jog
dial.
5.
Repeat steps 3 and 4 as required to
complete the settings for the
metronome.
6.
To return to the top screen of the
currently selected mode, press the
center of the [MENU] key.
When you perform playback or recording, the
selected metronome function will be active.
HINT
If you locate a point within a recording, and then
start playback/recording from there, the first beat
of the metronome will start from that point.
Controlling the display
contrast/backlight
To adjust the contrast of the display and switch
the backlight on or off, proceed as follows.
1.
At the stereo mode or 4-track mode
top screen, press the center of the
[MENU] key.
The main menu for miscellaneous settings of the
H4 appears.
2.
Move the jog dial up/down to bring
the cursor to "DISPLAY", and then
press the jog dial.
The DISPLAY setting screen appears.
78
Setting items available from this screen are as
follows.
• CONTRAST
Adjusts the display contrast. The setting
range is 1 – 8.
• BACK LIGHT
Switches the backlight on and off. Available
settings are ON (always on), OFF (always
o f f ) , 1 5 s e c ( d i s p l a y i s s w i t c h e d o f f
automatically 15 seconds after key/dial
operation), and 30sec (display is switched off
automatically 30 seconds after key/dial
operation).
3.
Move the jog dial up/down to bring
the cursor to the item to set, and
then press the jog dial.
The setting for the selected item can now be
adjusted.
4.
Move the jog dial up/down to adjust
the setting, and then press the jog
dial.
5.
Repeat steps 3 and 4 as required to
complete the settings for the display.
6.
To return to the top screen of the
currently selected mode, press the
center of the [MENU] key.
ZOOM H4