Setting Display Power Saving - Zoom R4 MultiTrak Operation Manual

Setting display power saving

In order to prevent power consumption when using batteries, the display backlight can be set to dim when
no operation is conducted for a set amount of time. This is on by default.
1.
Press and hold
This opens the Option Menu.
2.
While pressing
This opens the Settings Menu.
3.
Use
Proceed with the following selections.
System > Power Saving
4.
Use
Setting
Off
On (30sec)
when the Home Screen is open.
, press .
and to select an item, and use
and to select an item, and use
The display backlight always stays bright.
The backlight will dim after 30 seconds pass without operation.
Explanation
87
to confirm.
to confirm.