Zoom Handy Recorder H4 Operation Manual page 29

OK button
HINT
• This screen lets you change the format of the
resulting file (mono/stereo; default: stereo) or
→
specify the file name (
• If you do not specify a name, the file created by
bouncing will be automatically assigned a
name using the pattern "BOUNCExx.wav"
(where xx is a number from 00 – 99).
4.
To execute the bounce function,
move the jog dial up/down to bring
the cursor to the OK button. Then
press the jog dial.
While the bounce function is being executed, the
indication "Now Processing" is shown on the
display.
The file created by bouncing is saved in the same
"PROJxxx" folder as the other files recorded for
the current project (xxx = 000 – 999).
HINT
To check the bounce result using the H4 or to add
more tracks, assign the bounced file to one or two
tracks (→ p. 42). If a stereo file was produced,
stereo link for tracks 1/2 or 3/4 must be enabled
to allow assigning the file to the stereo track
→
( p. 53).
NOTE
If the SD card runs out of space during the
bounce operation, the indication "Card Full!"
appears on the display, and the operation is
canceled. Press the jog dial to close the window
and delete files that are no longer needed. Then
perform the bounce operation once more.
ZOOM H4
CANCEL button
p. 45).
Quick Guide 2 4-track mode basic operation
29