Functions added in Version 2.00 Support for timecode A dedicated BTA-1 wireless adapter can be connected to the to enable wireless reception of timecode from an UltraSync BLUE made by Timecode System. This timecode can be written to recorded files. Use of timecode makes synchronizing audio and video easy during editing.
Using timecode What is timecode? Timecode is time information written to video and audio data when recording. It is used for video editing, control of other devices, and synchronization of audio and video, for example. If the video and audio recordings being edited all have recorded timecode, aligning them to a timeline and syn- chronizing them together is easy when using nonlinear editing software for editing.
Page 4
Use to select “Timecode”, and press This reopens the Home Screen. “Searching” will appear on the display as the unit starts searching for a device to connect. HINT • Searching can be canceled by pressing any button. • If searching has been canceled, it can be restarted by selecting “Pair with the device” on the “Timecode” screen.
Disconnecting with the UltraSync BLUE Disconnecting the and the UltraSync BLUE will stop timecode recording. Pairing records will be retained even after disconnection. Press This opens the Menu screen. Use to select “BTA-1”, and press Use to select “Off”, and press HINT •...
Connecting with a different UltraSync BLUE To receive timecode from an UltraSync BLUE other than the one connected to the , the current UltraSync BLUE pairing (registration) must be forgotten and pairing with the other one must be conducted. Press This opens the Menu screen.
Page 7
Use to select “Pair With Device”, and press This reopens the Recording Screen. “Searching” will appear on the display as the unit starts searching for a device to connect. HINT • Searching can be canceled by pressing any button. • If searching has been canceled, it can be restarted by selecting “Pair With Device” on the “Timecode” screen. On the other UltraSync BLUE, select the as the device to connect.
Checking timecode information The timecode information received from an UltraSync BLUE can be checked. Press This opens the Menu screen. Use to select “Timecode”, and press Use to select “Timecode Information”, and press Confirm the information being received. The following file timecode information can be checked. Item Explanation Timecode...
Saving the times shown on the Home/Recording screen Press This opens the Menu screen. Use to select “Timecode”, and press Use to select “Home Time Display”, and press Use to select the display format, and press...
The timecode can be shown with the following formats. Item Explanation Both the recording time and timecode are shown. Rec Time & Timecode Only the timecode is shown. When the Home Screen is open, press momentarily show the remaining recording time. Timecode Only the recording time is shown Rec time...
Using H3 Control during audio interface operation The H3 Control app on an iOS device can now control the even during audio interface use. Use H3 Control to operate Use as an audio interface When the firmware is updated to Version 2.0, the H3 Control app for iOS will have an audio interface item added to the Menu.
Page 12
ZOOM CORPORATION 4-4-3 Kanda-surugadai, Chiyoda-ku, Tokyo 101-0062 Japan www.zoom.co.jp Z2I-3566-01...