Record - Zoom Handy Recorder H4 Operation Manual

format and then the sampling rate/bit rate.
(2) Press the jog dial.
The setting can now be changed.
(3) Move the jog dial up/down to change the
setting.
(4) To accept the new setting, press the jog
dial.
HINT
If you attempt to change the setting while the
recorder is operating, the indication "Stop
Recorder!" appears. In this case, press the center
of the [MENU] key to close the window and stop
the recorder before proceeding.
(5) Repeat steps (1) – (4) as required to set
other items.
4.
Press the center of the [MENU] key
to return to the stereo mode top
screen.
The new format will apply to the next recording.
In stereo mode, it is also possible to use the
TRACK [1] – [4] keys to switch the recording
format.
The key assignment is as follows.
TRACK [1] key
WAV (96 kHz)
TRACK [2] key
WAV (48 kHz)
TRACK [3] key
WAV (44.1 kHz)
TRACK [4] key
MP3 (44.1 kHz)
ZOOM H4
When you press a key, the key lights up and the
screen of step 2 appears, with the respective
format and sampling rate selected. If required,
change also the bit rate.

Record

Recording in stereo mode is performed as
follows.
1.
At the stereo mode top screen, press
the [REC] key.
The [REC] key flashes and the recorder is in the
recording standby condition.
In this condition, the input signal level (recording
level) can be checked with the meter indication.
If you press the left part (U), right part (I), or
top (@) of the [MENU] key, the recording
standby condition is canceled.
HINT
At any time when the counter is being shown on
the display, recording can be carried out.
2.
To start recording, press the [REC]
key once more.
A metronome function for use during recording
is also available ( → p. 77).
3.
To stop recording, press the [REC]
key once more, or press the top (@)
of the [MENU] key.
The counter returns to zero. If you press the top
(@) of the [MENU] key in this condition, you
can play back the recording from the beginning.
Stereo Mode
35