Recording; Let's Record - Zoom Palmtop Studio PS-04 Operation Manual

This section shows how to record a guitar connected to the [INPUT] jack.
1.
Connect the guitar to the [INPUT] jack.
2.
Press the [SYSTEM] key and then the [ENTER] key.
The indication "SELECT" appears on the display.
3.
Use the cursor left/right keys to bring up the indication "NEW" on the display,
and press the [ENTER] key twice.
The following indication appears on the display, and the PS-04 is ready for recording.
4.
Press the [TRACK PARAMETER] key.
When you press the [TRACK PARAMETER] key for the first time, the indication "INPUT SEL"
is shown for a few seconds, and then the indication "INPUT" appears.
H
INT
In the default condition, the [INPUT] jack is selected as input source. To record a
synthesizer or other device connected to the [LINE IN] jack, or to record from the built-in
mic, switch the input source to the respective setting (→ p. 53).
5.
While playing your guitar, adjust the input sensitivity by turning the [INPUT
LEVEL] knob on the rear panel of the PS-04.
If the indication "-PEAK-" appears on the display, the input signal will be distorted. Turn the
[INPUT LEVEL] knob down.
ZOOM PS-04

Let's Record

OOOOOO OOOOOO
INPUT INPUT
-PEAK- -PEAK-
13