IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precaution should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING (THIS APPLIANCE) To reduce the risk of fire, electric shock, or injury: WARNING- 1. Do not leave vacuum cleaner when plugged in. Unplug from outlet when no use and before servicing.
Page 4
PREVENTION Switch off the vacuum cleaner immediately if the air intakes, the floor brushes or the telescopes tube becomes blocked. Before starting the vacuum cleaner up again remove the substance causing the blockage: 1. Never use the vacuum cleaner in the immediate vicinity of hot bodies and do not suck up hot objects such as cigarette ends or ashes.
PREPARING THE VACUUM CLEANER 1. Fit the hose on the vacuum cleaner by inserting the rotating hose connection into the vacuum cleaner until you hear a click. To remove the hose, press the button at the side of the hose connection and pull it out.
Page 6
Vacuum cleaning 1:Before using the device first roll out a sufficient length of electric flex cable and plug into the mains socket. The yellow mark on the electric flex cable is the maximum length that must not be exceeded. To switch on the device press the foot pedal button on the casing with your foot 2:To rewind the power cable,press the button with one hand and guide the cable with the other hand to ensure that it does not whip causing damage.
Page 7
5. press the open button. The base opens and the dust runs into the dustbin. 6. carefully knock the remaining dust loose. 7. close the base. 8. place the dust container onto the cylinder vacuum cleaner. 9. check whether the dust container is securely seated. Cleaning the motor filter 1.
Transport and Storage 1. You can lift and carry the vacuum cleaner using the carrying handle. Never pull or lift the vacuum cleaner by the cord. 2. Befor putting the vacuum away, rewind the cord. Switch off the socket, unplug, and press the cord rewind button until the cord is fully rewound.