• Do not use lubricants, detergents, polishes, etc., to clean the unit • Do not attempt to repair or modify the unit. Contact Kogan.com in the event of a fault. • This product is a power tool; never allow it to operate unattended.
Page 4
• Do not disassemble the dust cup, the UV lamp cover or open the air hood when the machine is powered or running to avoid injury or machine damage. • Only use the original power adaptor included with the product. Ultraviolet safety precautions •...
OPERATION ATTENTION: Before assembling the product, please check the accessories list below and confirm that all parts have been received. Before use • Ensure the components of the UV vacuum cleaner are assembled in place. • Check whether the power is sufficient to ensure the product works normally. Charging instructions •...
Page 6
Indicator light Press the power button, and once all three lights are illuminated, the machine is ready to operate. Press the power button again to power the unit off. • 3 lights 100% • 2 lights 65% • 1 light 30% •...
CLEANING & CARE Cleaning the dust box Turn the dust cap clockwise Clean the dust box with Remove the dust box Separate the dust box a brush Turn the dust cap clockwise Clean the cotton filter Wash the cyclone filter and remove the cyclone filter with a brush or wash...
Page 8
Exhaust filter Outlet housing Twist the outlet housing clockwise Remove the exhaust filter and wash ATTENTION: Washable parts can only be reinstalled into the appliance once they have dried completely. Daily storage • When not using the machine for a long time, store in a cool and dry place. Do not place the machine in direct sunlight or a moist environment.
SPECIFICATIONS Voltage 21.6V Power 100W Max Power 120W Capacity ≥0.5L UV lamp power Net weight 1.5kg Charging time 4.5h Adapter voltage input 100-240V~ 50/60Hz Adapter voltage output DC 26V 0.5A Working time Approx. 25min Battery capacity 2200mAh IN THE BOX Main unit Charging base Dust cup (pre-assembled)
TROUBLESHOOTING Details Possible cause Solution Low battery Charge the battery Machine will not power on Power switch has not been Press the power switch pressed The suction inlet of the Insufficient suction Clean the suction inlet machine is blocked Object surface is not smooth, Keep the surface flat or the or the machine bottom does machine bottom the full...
Page 12
Need more information? We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com...