Removing A Pci Riser-Card Assembly - IBM System x3650 M4 Type 7915 Installation And User Manual

Removing a PCI riser-card assembly

The server comes with one riser-card assembly (with option to add one more) that
each contains two to three PCI slots. See http://www.ibm.com/servers/eserver/
serverproven/compat/us/ for a list of riser-card assemblies that you can use with the
server.
To remove the riser-card assembly, complete the following steps:
1. Read the safety information that begins on page vii and "Installation guidelines"
2. Turn off the server and peripheral devices, and disconnect the power cord and
3. Remove the cover (see "Removing the cover" on page 54).
4. Grasp the assembly at the front tab and rear edge and lift it to remove it from
on page 40.
all external cables.
the server. Place the riser-card assembly on a flat, static-protective surface.
PCI riser-card
assembly 2
Chapter 2. Installing optional devices
PCI riser-card
assembly 1
55