Wan Settings - Rosewill RNX-N4 User Manual

Wireless Adapter RNX-N4
• WPA Mode: Select the WPA / WPA2 from the drop-down list.
• Cipher Type: Select TKIP or AES as the cipher suite. The encryption algorithm used to
secure the data communication. TKIP. Use TKIP only. TKIP (Temporal Key Integrity
Protocol) provides per-packet key generation and is based on WEP. AES. Use AES only.
AES (Advanced Encryption Standard) is a very secure block based encryption. Note
that, if the bridge uses the AES option, the bridge can associate with the access point
only if the access point is also set to use only AES. TKIP and AES. The bridge
negotiates the cipher type with the access point, and uses AES when available.
• Group Key Update Interval: Specify the number of seconds before the group key
used for broadcast and multicast data is changed.
• Authentication Timeout: Specify the number of minutes after which the client will be
required to re-authenticate.
• RADIUS Server IP Address: Specify the IP address of the RADIUS server.
• RADIUS Server Port: Specify the port number of the RADIUS server, the default port is
1812.
• RADIUS Server Shared Secret: Specify the pass-phrase that is matched on the
RADIUS Server.
• MAC Address Authentication: Place a check in this box if you would like the user to
always authenticate using the same computer.
• Optional Backup RADIUS server: This option enables configuration of an optional
second RADIUS server. A second RADIUS server can be used as backup for the
primary RADIUS server. The second RADIUS server is consulted only when the primary
server is not available or not responding.
• Click on the Save Changes button to store these settings.

6.2.4 WAN Settings

• The device offers several types of WAN connections in order to connect to the Internet.
• Static IP Address
• Dynamic IP Address
• PPPoE
• PPTP
• L2TP
• BigPond
42
User Manual